EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Numerical Study on Effect of Contact and Interfacial Resistance on Thermal Conductivity of Dispersed Composites

Atsushi Kondo iD, Hiroshi Matsuura, Yoshiharu Ito

Materials · 05.01.2023 · 16 (2) · 517

DOI: 10.3390/ma16020517 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 05.01.2023. Verfasst von Atsushi Kondo und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Nippon Institute of Technology, 4-1 Gakuendai, Miyashiro-machi, Minamisaitama-gun 345-8501, Saitama Prefecture,…. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A series of finite element analyses were conducted to clarify the effect of contact and interfacial resistance between constituents on effective thermal conductivities of dispersed composites. Equally dispersed fillers in FCC (face-centered cubic) and BCC (body-centered cubic) material systems were extracted from cyclic microstructures as unit cell models. In addition to spherical fillers, a polyhedron called the Wigner–Seitz cell that can realize a fully packed microstructure was chosen as the shape of the filler to investigate the effect of contact between the high volumetric fraction of fillers. The effective thermal conductivities of the resulting composites were calculated based on the FEA results and compared to the theoretical results for various volume fractions of the fillers including the maximum packing fraction. The following conclusions were obtained from the present study: 1. The effect of the contact depending on the shape and configuration of the fillers has more of a significant influence on the effective thermal conductivity than the influence of the increase in the volume fraction of the fillers. 2. When the contact occurred, the effective thermal conductivity became more than double that without contact. 3. Interfacial thermal resistance must be less than the order of 10−4 m2 K/W to obtain improvement in the effective thermal conductivity by compounding the fillers.

Schlagwörter

Stichwörter der Autor:innen

compositesinterfacial thermal resistancethermal conductivity

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Nippon Institute of Technology, 4-1 Gakuendai, Miyashiro-machi, Minamisaitama-gun 345-8501, Saitama Prefecture, Japan.
  • Department of Mechanical Systems Engineering, Aichi University of Technology, 50-2 Manori, Gamagori 443-0047, Aichi Prefecture, Japan.

ORCID-Profile: Atsushi Kondo

Zitieren

APA

Kondo, A., Matsuura, H., & Ito, Y. (2023). Numerical Study on Effect of Contact and Interfacial Resistance on Thermal Conductivity of Dispersed Composites. Materials, 16(2), 517. https://doi.org/10.3390/ma16020517

Vancouver

Kondo A, Matsuura H, Ito Y. Numerical Study on Effect of Contact and Interfacial Resistance on Thermal Conductivity of Dispersed Composites. Materials. 2023;16(2):517. doi:10.3390/ma16020517

BibTeX
@article{Kondo2023,
  author = {Kondo, Atsushi and Matsuura, Hiroshi and Ito, Yoshiharu},
  title = {Numerical Study on Effect of Contact and Interfacial Resistance on Thermal Conductivity of Dispersed Composites},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {2},
  pages = {517},
  doi = {10.3390/ma16020517}
}
Kostenlos starten →