EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Residual Compressive Strength Prediction Model for Concrete Subject to High Temperatures Using Ultrasonic Pulse Velocity

Wonchang Kim, Hyeonggil Choi, Taegyu Lee iD

Materials · 05.01.2023 · 16 (2) · 515

DOI: 10.3390/ma16020515 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 05.01.2023. Verfasst von Wonchang Kim und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Fire and Disaster Prevention, Semyung University, Jecheon-si 27136, Republic of Korea. Die Arbeit wurde bisher 31-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Agency for Infrastructure Technology Advancement (KAIA), Korean government (MOLIT).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study measured and analyzed the mechanical properties of normal aggregate concrete (NC) and lightweight aggregate concrete (LC) subjected to high temperatures. The target temperature was set to 100, 200, 300, 500, and 700 °C, and W/C was set to 0.41, 0.33 and 0.28 to evaluate high temperature properties at various intensities. Measurement parameters included mass loss, compressive strength, ultrasonic pulse velocity (UPV), and elastic modulus. We compared the residual mechanical properties between the target and preheating temperatures (20 °C) and then analyzed the correlation between UPV and compressive strength. According to the research findings, after exposure to high temperatures, LC demonstrated a higher mass reduction rate than NC at all levels and exhibited higher residual mechanical properties. The results of analyzing the correlation between compressive strength and UPV for concrete subjected high temperatures were very different from the compressive strength prediction equation previous proposed at room temperature, and the error range of the residual strength prediction equation considering W/C was reduced.

Schlagwörter

Stichwörter der Autor:innen

compressive strengthhigh temperatureprediction modeltype of coarse aggregateultrasonic pulse velocitywater-binder

Autor:innen und Institutionen

  • Department of Fire and Disaster Prevention, Semyung University, Jecheon-si 27136, Republic of Korea.
  • School of Architecture and Civil Engineering, Kyungpook National University, Daegu 41566, Republic of Korea.

ORCID-Profile: Taegyu Lee

Förderung

  • Korea Agency for Infrastructure Technology Advancement (KAIA)
  • Korean government (MOLIT)

Zitieren

APA

Kim, W., Choi, H., & Lee, T. (2023). Residual Compressive Strength Prediction Model for Concrete Subject to High Temperatures Using Ultrasonic Pulse Velocity. Materials, 16(2), 515. https://doi.org/10.3390/ma16020515

Vancouver

Kim W, Choi H, Lee T. Residual Compressive Strength Prediction Model for Concrete Subject to High Temperatures Using Ultrasonic Pulse Velocity. Materials. 2023;16(2):515. doi:10.3390/ma16020515

BibTeX
@article{Kim2023,
  author = {Kim, Wonchang and Choi, Hyeonggil and Lee, Taegyu},
  title = {Residual Compressive Strength Prediction Model for Concrete Subject to High Temperatures Using Ultrasonic Pulse Velocity},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {2},
  pages = {515},
  doi = {10.3390/ma16020515}
}
Kostenlos starten →