EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Comprehensive Investigation into the Effects of Structural Factors on the Shear Stability of High-Viscosity Metallocene Poly(α-Olefins)

Jingchun Zhang, Jian Xu, Zhongxiang Bai, Xuemei Liang, Ruilong Li, Jianxin Shi, Jiusheng Li

Lubricants · 16.11.2026 · 14 (11) · 436

DOI: 10.3390/lubricants14110436 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Lubricants, online erschienen am 16.11.2026. Verfasst von Jingchun Zhang und 6 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Energy Group Ningxia Coal Industry Co., Ltd..

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-viscosity metallocene poly(α-olefins) are important synthetic lubricant base oils. However, the effects of molecular structure on permanent viscosity loss during mechanical shearing remain insufficiently understood. In this study, mPAO with varying monomer carbon numbers, kinematic viscosities, molecular weight distributions, chain stereoregularities, and residual unsaturation levels were investigated using KRL shear testing, gel permeation chromatography, and spectroscopic characterization. The results showed that the number-average molecular weight decreased and the molecular weight distribution broadened after shearing, whereas the weight-average molecular weight changed only slightly, suggesting that molecular weight changes primarily involved a fraction of the polymer chains. Fourier transform infrared spectroscopy revealed oxidation-related changes after shearing, suggesting that oxidation-induced viscosity increase may partially offset shear-induced viscosity loss. Different side-chain structures exhibited distinct shear responses as the monomer carbon number varied. For samples with similar side-chain structures, the viscosity loss rate increased nonlinearly and in a stepwise manner with increasing backbone length. A broader initial molecular weight distribution was associated with greater PVL, whereas higher chain stereoregularity and lower residual unsaturation were associated with improved shear stability. These findings clarify the relationships between molecular structural parameters and the mechanical shear stability of mPAO, providing a basis for designing high-viscosity lubricant base oils with improved shear stability.

Förderung

  • National Energy Group Ningxia Coal Industry Co., Ltd.

Zitieren

APA

Zhang, J., Xu, J., Bai, Z., Liang, X., Li, R., Shi, J., & Li, J. (2026). Comprehensive Investigation into the Effects of Structural Factors on the Shear Stability of High-Viscosity Metallocene Poly(α-Olefins). Lubricants, 14(11), 436. https://doi.org/10.3390/lubricants14110436

Vancouver

Zhang J, Xu J, Bai Z, Liang X, Li R, Shi J, et al. Comprehensive Investigation into the Effects of Structural Factors on the Shear Stability of High-Viscosity Metallocene Poly(α-Olefins). Lubricants. 2026;14(11):436. doi:10.3390/lubricants14110436

BibTeX
@article{Zhang2026,
  author = {Zhang, Jingchun and Xu, Jian and Bai, Zhongxiang and Liang, Xuemei and Li, Ruilong and Shi, Jianxin and Li, Jiusheng},
  title = {Comprehensive Investigation into the Effects of Structural Factors on the Shear Stability of High-Viscosity Metallocene Poly(α-Olefins)},
  journal = {Lubricants},
  year = {2026},
  volume = {14},
  number = {11},
  pages = {436},
  doi = {10.3390/lubricants14110436}
}
Kostenlos starten →