EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigation of Structure-Induced Cavitation at the Oil-Groove–Oil-Hole Intersection of a Diesel Engine Main Bearing

Zhifei Dang, Liting Li, Tianyi Yu, Jingbin Liu, Mei Li, Zhenming Liu, Yabing Xu, Haonan Wei

Lubricants · 12.11.2026 · 14 (11) · 430

DOI: 10.3390/lubricants14110430 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Lubricants, online erschienen am 12.11.2026. Verfasst von Zhifei Dang und 7 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Postdoctoral Fellowship Program of CPSF, National Key Laboratory of Marine Engine Science and Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Structure-induced cavitation occurs at the oil groove–oil hole intersection of main bearings in high-performance diesel engines. Large eddy simulation combined with a multiphase cavitation model was used to investigate the effects of oil-hole fillet radius, chamfer angle, oil-groove depth, and groove-end profile. Cavitation volume fraction, cavitation extent ratio, and their time integrals were evaluated separately on the bearing-shell and journal sides. Compared with the 3 mm fillet baseline, a 5 mm fillet reduced the integrated cavitation volume fraction by 66.26% on the bearing-shell side and 22.62% on the journal side. A 30° chamfer also reduced both integrated indices relative to the baseline, whereas increasing the chamfer angle shifted cavitation clouds toward the bearing-shell wall. Increasing groove depth intensified cavitation on both sides. Tangent Bézier profiles reduced peak velocity and weakened incipient cavitation, but promoted wall-attached jets and prolonged cavitation, increasing the time-integrated indices. These results show that local geometry affects the responses on the two sides through changes in jet direction, cavitation migration, and duration, providing design guidance for controlling cavitation in diesel-engine main bearings.

Förderung

  • Postdoctoral Fellowship Program of CPSF
  • National Key Laboratory of Marine Engine Science and Technology

Zitieren

APA

Dang, Z., Li, L., Yu, T., Liu, J., Li, M., Liu, Z., Xu, Y., & Wei, H. (2026). Investigation of Structure-Induced Cavitation at the Oil-Groove–Oil-Hole Intersection of a Diesel Engine Main Bearing. Lubricants, 14(11), 430. https://doi.org/10.3390/lubricants14110430

Vancouver

Dang Z, Li L, Yu T, Liu J, Li M, Liu Z, et al. Investigation of Structure-Induced Cavitation at the Oil-Groove–Oil-Hole Intersection of a Diesel Engine Main Bearing. Lubricants. 2026;14(11):430. doi:10.3390/lubricants14110430

BibTeX
@article{Dang2026,
  author = {Dang, Zhifei and Li, Liting and Yu, Tianyi and Liu, Jingbin and Li, Mei and Liu, Zhenming and Xu, Yabing and Wei, Haonan},
  title = {Investigation of Structure-Induced Cavitation at the Oil-Groove–Oil-Hole Intersection of a Diesel Engine Main Bearing},
  journal = {Lubricants},
  year = {2026},
  volume = {14},
  number = {11},
  pages = {430},
  doi = {10.3390/lubricants14110430}
}
Kostenlos starten →