EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

SPH-Based Local Lubricant Availability Assessment and Candidate-Region Screening for Oil Suction Port Placement Under Continuous Maneuvering

Wenlong Gao, Lei Li, Shengqiang Zhu, Mengxiang Zhang, Yun Cheng, Xingming Chen, Shengjie Gai, Hongjie Li, Shengdun Zhao, Guangzhi Dong

Lubricants · 11.11.2026 · 14 (11) · 428

DOI: 10.3390/lubricants14110428 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Lubricants, online erschienen am 11.11.2026. Verfasst von Wenlong Gao und 9 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China, Open Foundation of the State Key Laboratory of Fluid Power and Mechatronic Systems.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In aviation lubrication systems, changes in lubricant flow and spatial distribution under different operating conditions can affect lubricant delivery and lubrication performance. Existing studies have used flow variables such as velocity and pressure, together with instantaneous spatial distributions, to characterize flow states. Although these quantities can effectively characterize flow states and their evolution, they are often difficult to directly translate into quantitative evaluation results for structural design, comparison of different configurations, and engineering decision-making. To address this issue, a local lubricant availability assessment and candidate-region screening approach is developed based on smoothed particle hydrodynamics (SPH) simulation results. Low-percentile availability A5, minimum availability Amin, and the longest continuous low-oil duration L50 are jointly used to assess the local lubricant state at different spatial locations. An aviation lubricant tank is considered as the application case, and local lubricant conditions under different initial oil volumes and baffle configurations are compared under identical maneuvering conditions. The results show that, within the investigated volume range, the initial oil volume is closely related to the local lubricant state and the extent of the candidate region. As the oil volume decreases, local lubricant deficiency becomes more pronounced, and the differences among baffle configurations become more evident. At an initial oil volume of 10 L, the cross-baffle configuration provides the largest candidate-region area ratio among the four configurations, reaching 59.39%, compared with 4.19% for the no-baffle case. The proposed framework translates transient flow differences under different operating conditions and structural configurations into spatially explicit candidate regions, providing a quantitative basis for preliminary oil suction port placement.

Förderung

  • National Key Research and Development Program of China
  • National Natural Science Foundation of China
  • Open Foundation of the State Key Laboratory of Fluid Power and Mechatronic Systems
  • A Stable Support Project

Zitieren

APA

Gao, W., Li, L., Zhu, S., Zhang, M., Cheng, Y., Chen, X., Gai, S., Li, H., Zhao, S., & Dong, G. (2026). SPH-Based Local Lubricant Availability Assessment and Candidate-Region Screening for Oil Suction Port Placement Under Continuous Maneuvering. Lubricants, 14(11), 428. https://doi.org/10.3390/lubricants14110428

Vancouver

Gao W, Li L, Zhu S, Zhang M, Cheng Y, Chen X, et al. SPH-Based Local Lubricant Availability Assessment and Candidate-Region Screening for Oil Suction Port Placement Under Continuous Maneuvering. Lubricants. 2026;14(11):428. doi:10.3390/lubricants14110428

BibTeX
@article{Gao2026,
  author = {Gao, Wenlong and Li, Lei and Zhu, Shengqiang and Zhang, Mengxiang and Cheng, Yun and Chen, Xingming and Gai, Shengjie and Li, Hongjie and Zhao, Shengdun and Dong, Guangzhi},
  title = {SPH-Based Local Lubricant Availability Assessment and Candidate-Region Screening for Oil Suction Port Placement Under Continuous Maneuvering},
  journal = {Lubricants},
  year = {2026},
  volume = {14},
  number = {11},
  pages = {428},
  doi = {10.3390/lubricants14110428}
}
Kostenlos starten →