EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Friction–Adhesion Coupling Behavior of SBS-Modified Asphalt Pavement with Discontinuous Surface Texture

Gang Li, Jiangang Li, Zhane Li, Xin Lu, Yingling Li, Yun Lin, Xingnan Hu, Wei Kang

Lubricants · 21.08.2026 · 14 (8) · 324

DOI: 10.3390/lubricants14080324 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Lubricants, online erschienen am 21.08.2026. Verfasst von Gang Li und 7 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Research and Development Project of Qinghai Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Pitting distress introduces discontinuous surface texture, thereby modifying the friction–adhesion coupling at the rubber–asphalt interface. This study systematically investigates the interfacial friction response of SBS-modified asphalt pavements with three pitting distribution patterns (sparse, medium, and dense) under varying sliding rates, temperatures, and cyclic loading using a custom-developed friction testing apparatus. The results reveal that adhesion-dominated friction is strongly dependent on both texture distribution and operating conditions. With increasing temperature, the dense pattern exhibits the most pronounced adhesion enhancement, with an average friction increase of 55.0%. The sparse pattern shows a continuous decreasing trend in the low-to-medium speed range, but exhibits a strengthening rebound at high speeds, demonstrating the most complex rate sensitivity. Under cyclic loading, among the three pitting patterns tested, the dense pattern exhibits the best friction retention, with an average friction reduction of only 6.2% after 30 cycles, compared to 9.5% for the sparse pattern and 10.8% for the medium pattern. Three-dimensional topography indicates that the medium pattern exhibits a continuous and relatively uniform wavy roughness, while the dense pattern transforms into a high-frequency serrated morphology. However, the wear in both patterns is dominated by homogenized micro-grooves, without the formation of local deep pits or sharp undulations, which favors the maintenance of stable skid resistance under the laboratory cyclic loading conditions tested in this study. Furthermore, a unified regression model with distribution dummy variables and interaction terms (R2 = 0.826; cross-validated Q2 = 0.646) quantifies the synergistic effect of pitting density and temperature, with the temperature sensitivity increasing six-fold from the sparse to the dense pattern (0.011 to 0.071 N/°C).

Förderung

  • Key Research and Development Project of Qinghai Province

Zitieren

APA

Li, G., Li, J., Li, Z., Lu, X., Li, Y., Lin, Y., Hu, X., & Kang, W. (2026). Friction–Adhesion Coupling Behavior of SBS-Modified Asphalt Pavement with Discontinuous Surface Texture. Lubricants, 14(8), 324. https://doi.org/10.3390/lubricants14080324

Vancouver

Li G, Li J, Li Z, Lu X, Li Y, Lin Y, et al. Friction–Adhesion Coupling Behavior of SBS-Modified Asphalt Pavement with Discontinuous Surface Texture. Lubricants. 2026;14(8):324. doi:10.3390/lubricants14080324

BibTeX
@article{Li2026,
  author = {Li, Gang and Li, Jiangang and Li, Zhane and Lu, Xin and Li, Yingling and Lin, Yun and Hu, Xingnan and Kang, Wei},
  title = {Friction–Adhesion Coupling Behavior of SBS-Modified Asphalt Pavement with Discontinuous Surface Texture},
  journal = {Lubricants},
  year = {2026},
  volume = {14},
  number = {8},
  pages = {324},
  doi = {10.3390/lubricants14080324}
}
Kostenlos starten →