EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Transient Evolution of the Piston–Cylinder Oil Film and Thermo–Fluid–Solid Coupling Response in an Axial Piston Pump Under Complex Operating Conditions

Sibo Liu, Hongwang Zhao, Jiabao Li, Dandan Wu, Hao Li, Zhong Liu

Lubricants · 18.08.2026 · 14 (8) · 319

DOI: 10.3390/lubricants14080319 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Lubricants, online erschienen am 18.08.2026. Verfasst von Sibo Liu und 5 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangxi Natural Science Foundation Project, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Existing piston–cylinder lubrication studies often simplify the pressure boundary as a constant load or a single field, making it difficult to capture pump-level pressure excitation, local oil-film response, and non-concentric posture under variable loading. This paper establishes a thermo–fluid–solid coupling framework integrating an AMESim full-pump model, a Fluent transient oil-film model, and a Transient Structural model; UDF transfer of periodic pressure, dynamic meshes, and a calibrated Roelands law were used to analyze parallel-offset and center-tilted postures. As the load pressure increased from 10 to 30 MPa, the maximum discharge–half-cycle temperature rose from 28.39 to 36.95 °C, and the average positive leakage during the third-cycle high-pressure stage increased from 0.0201 to 0.1026 L/min; increasing speed from 1000 to 3000 r/min reduced cycle-averaged leakage by 8.93%. At 500 r/min and 30 MPa, the parallel-offset case reached 46.34 °C, 41 kPa, and 0.0990 L/min in maximum temperature, maximum shear stress, and average leakage, whereas the center-tilted case produced a peak resultant force of 3537.12 N, a cylinder inner-wall high-stress band of 76.96 MPa, and a maximum piston deformation and equivalent stress of 4.31 μm and 83.16 MPa. These results clarify the distinct lubrication behavior and potential uneven-wear risk associated with the two representative non-concentric postures, and provide a basis for clearance design and posture-sensitive condition assessment of axial piston pumps.

Förderung

  • Guangxi Natural Science Foundation Project
  • National Natural Science Foundation of China

Zitieren

APA

Liu, S., Zhao, H., Li, J., Wu, D., Li, H., & Liu, Z. (2026). Transient Evolution of the Piston–Cylinder Oil Film and Thermo–Fluid–Solid Coupling Response in an Axial Piston Pump Under Complex Operating Conditions. Lubricants, 14(8), 319. https://doi.org/10.3390/lubricants14080319

Vancouver

Liu S, Zhao H, Li J, Wu D, Li H, Liu Z. Transient Evolution of the Piston–Cylinder Oil Film and Thermo–Fluid–Solid Coupling Response in an Axial Piston Pump Under Complex Operating Conditions. Lubricants. 2026;14(8):319. doi:10.3390/lubricants14080319

BibTeX
@article{Liu2026,
  author = {Liu, Sibo and Zhao, Hongwang and Li, Jiabao and Wu, Dandan and Li, Hao and Liu, Zhong},
  title = {Transient Evolution of the Piston–Cylinder Oil Film and Thermo–Fluid–Solid Coupling Response in an Axial Piston Pump Under Complex Operating Conditions},
  journal = {Lubricants},
  year = {2026},
  volume = {14},
  number = {8},
  pages = {319},
  doi = {10.3390/lubricants14080319}
}
Kostenlos starten →