EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Prediction of Iron Wear Metal Concentration in Used Engine Oils from FT-IR Spectra Using Partial Least Squares Regression

Adam Agocs, Georg Vorlaufer, Marcella Frauscher, Charlotte Besser

Lubricants · 13.08.2026 · 14 (8) · 310

DOI: 10.3390/lubricants14080310 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Lubricants, online erschienen am 13.08.2026. Verfasst von Adam Agocs und 3 weiteren Autor:innen. Die Arbeit nennt 76 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: BMIMI.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Wear metal monitoring is an important component of lubricant condition monitoring but commonly relies on elemental techniques such as inductively coupled plasma optical emission spectroscopy (ICP-OES), which require dedicated laboratory infrastructure and sample preparation. This study evaluates whether Fourier-transform infrared (FT-IR) spectra of used engine oils can be combined with partial least squares (PLS) regression to provide a rapid screening estimate of iron (Fe) concentration. Used petrol and diesel engine oil samples were analyzed by FT-IR spectroscopy and ICP-OES. PLS models were developed using processed FT-IR spectra as predictor variables and ICP-OES-derived Fe concentrations as response variables. For petrol used oil samples, the optimized model employing 18 latent variables achieved a root mean squared error of 5.02 ppm and a coefficient of determination of 0.97 between measured and predicted Fe concentrations. Model loadings indicated contributions from spectral features associated with soot, oxidation, nitration, antioxidant (AO) depletion, and zinc dialkyldithiophosphate depletion. Combining petrol and diesel samples in a single model reduced predictive performance and increased uncertainty, indicating that their differing degradation pathways cannot be adequately represented by one common latent variable model. The approach does not directly measure Fe and is not intended to replace elemental analysis. Instead, it provides a rapid, low-cost screening tool for identifying samples with potentially elevated wear metal concentrations and prioritizing them for confirmatory analysis.

Förderung

  • BMIMI

Zitieren

APA

Agocs, A., Vorlaufer, G., Frauscher, M., & Besser, C. (2026). Prediction of Iron Wear Metal Concentration in Used Engine Oils from FT-IR Spectra Using Partial Least Squares Regression. Lubricants, 14(8), 310. https://doi.org/10.3390/lubricants14080310

Vancouver

Agocs A, Vorlaufer G, Frauscher M, Besser C. Prediction of Iron Wear Metal Concentration in Used Engine Oils from FT-IR Spectra Using Partial Least Squares Regression. Lubricants. 2026;14(8):310. doi:10.3390/lubricants14080310

BibTeX
@article{Agocs2026,
  author = {Agocs, Adam and Vorlaufer, Georg and Frauscher, Marcella and Besser, Charlotte},
  title = {Prediction of Iron Wear Metal Concentration in Used Engine Oils from FT-IR Spectra Using Partial Least Squares Regression},
  journal = {Lubricants},
  year = {2026},
  volume = {14},
  number = {8},
  pages = {310},
  doi = {10.3390/lubricants14080310}
}
Kostenlos starten →