Transient Flow–Thermal–Structural Response and Candidate High-Risk Region Identification of an Axial Piston Pump Slipper Pair Under Variable Loading
Lubricants · 24.07.2026 · 14 (8) · 285
DOI: 10.3390/lubricants14080285 ↗Kurz gefasst
Fachartikel in der Zeitschrift Lubricants, online erschienen am 24.07.2026. Verfasst von Jiabao Li und 7 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangxi Natural Science Foundation, Guangxi Key Laboratory of Special Engineering Equipment and Control, Guilin University of Aerospace Technology, Opening Foundation of Shandong Key Laboratory of Intelligent Manufacturing Technology for Advanced Power Equipment, Weifang University.
Abstract (Originalsprache)
In axial piston pumps under variable loading, the system-level excitation and local tribological responses of the slipper pair can become temporally and spatially decoupled. The scientific contribution of this paper is a phase-consistent chain that achieves three things: it resolves the central-pocket pressure boundary with a dual-orifice and dual-control-volume model instead of directly imposing piston chamber pressure, propagates this boundary through posture-dependent clearance to three-dimensional flow–thermal and single-slipper structural responses within the same local cycle, and screens candidate high-risk regions from the spatial proximity and phase relationship of multi-field cycle envelopes rather than from a single peak. The results show that the central pocket pressure exhibits peak attenuation, peak-time difference, and pressure-rate weakening relative to the piston chamber pressure. The steady peak attenuation ratio is 2.83–3.33%, while pressure-rate weakening under variable loading is 6.29–7.14%; the high-to-low unloading case gives the largest attenuation of 4.81%. Increasing steady load reduces the tilt amplitude and raises the minimum film thickness from about 13.024 to 13.452μm, but the maximum temperature rise increases from 34.12 to 65.01K. A 10% cycle-envelope projection shows no common overlap among the film-thinning, oil-film temperature-rise, and structural-stress core high-response regions with pairwise overlap ratios of 0–3.27%. This traceable chain supports comparative lubrication-safety screening; the identified zones remain numerical candidates rather than experimentally confirmed wear or failure regions.
Förderung
- Guangxi Natural Science Foundation
- Guangxi Key Laboratory of Special Engineering Equipment and Control, Guilin University of Aerospace Technology
- Opening Foundation of Shandong Key Laboratory of Intelligent Manufacturing Technology for Advanced Power Equipment, Weifang University
Zitieren
APA
Li, J., Xiong, Z., Liu, Z., Liu, X., Liu, S., Guo, C., Zhou, X., & Hu, W. (2026). Transient Flow–Thermal–Structural Response and Candidate High-Risk Region Identification of an Axial Piston Pump Slipper Pair Under Variable Loading. Lubricants, 14(8), 285. https://doi.org/10.3390/lubricants14080285
Vancouver
Li J, Xiong Z, Liu Z, Liu X, Liu S, Guo C, et al. Transient Flow–Thermal–Structural Response and Candidate High-Risk Region Identification of an Axial Piston Pump Slipper Pair Under Variable Loading. Lubricants. 2026;14(8):285. doi:10.3390/lubricants14080285
BibTeX
@article{Li2026,
author = {Li, Jiabao and Xiong, Zhonggang and Liu, Zhong and Liu, Xintao and Liu, Sibo and Guo, Cong and Zhou, Xingyu and Hu, Wenqiang},
title = {Transient Flow–Thermal–Structural Response and Candidate High-Risk Region Identification of an Axial Piston Pump Slipper Pair Under Variable Loading},
journal = {Lubricants},
year = {2026},
volume = {14},
number = {8},
pages = {285},
doi = {10.3390/lubricants14080285}
}
EUVIMED