EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of WC Particle Morphology on the Microstructure and Performance of Laser-Cladded Ni-Based WC Composite Coatings on 0Cr13Ni5Mo Steel

Jiajun Li, Ruilin Zeng, Shequan Wang, Ninghua Long, Kongming Yan, Qun Wang, Chidambaram Seshadri Ramachandran

Lubricants · 25.05.2026 · 14 (6) · 215

DOI: 10.3390/lubricants14060215 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Lubricants, online erschienen am 25.05.2026. Verfasst von Jiajun Li und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: State Key Laboratory Project of China Minmetals Corporation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ni-based WC composite coatings are widely used to protect hydraulic components, yet the role of WC particle morphology in binder-phase strengthening remains unclear. In this study, two Ni40-based coatings containing 55 wt.% WC were laser-cladded on 0Cr13Ni5Mo steel under identical conditions using either rough spherical WC coating (RWC) or smooth spherical WC coating (SWC). Both coatings were mainly composed of γ-Ni, residual WC, W2C, carbides, and borides. Although the rough WC particles showed about 38% lower intrinsic hardness than the smooth WC particles, the RWC exhibited a 25% higher binder-phase hardness and a 47% higher overall coating hardness. Accordingly, compared with the SWC, the RWC reduced the specific wear rate by about 33% under water-lubricated sliding. In slurry erosion, the RWC consistently showed lower erosion rates and less severe surface damage. The improved performance is attributed to the greater dissolution of rough WC during laser cladding, which strengthened the Ni-based binder and provided more stable support for the hard phases. These results demonstrate that tailoring WC particle morphology is an effective strategy for designing wear- and slurry erosion-resistant Ni-based laser-cladded coatings.

Förderung

  • State Key Laboratory Project of China Minmetals Corporation

Zitieren

APA

Li, J., Zeng, R., Wang, S., Long, N., Yan, K., Wang, Q., & Ramachandran, C. S. (2026). Influence of WC Particle Morphology on the Microstructure and Performance of Laser-Cladded Ni-Based WC Composite Coatings on 0Cr13Ni5Mo Steel. Lubricants, 14(6), 215. https://doi.org/10.3390/lubricants14060215

Vancouver

Li J, Zeng R, Wang S, Long N, Yan K, Wang Q, et al. Influence of WC Particle Morphology on the Microstructure and Performance of Laser-Cladded Ni-Based WC Composite Coatings on 0Cr13Ni5Mo Steel. Lubricants. 2026;14(6):215. doi:10.3390/lubricants14060215

BibTeX
@article{Li2026,
  author = {Li, Jiajun and Zeng, Ruilin and Wang, Shequan and Long, Ninghua and Yan, Kongming and Wang, Qun and Ramachandran, Chidambaram Seshadri},
  title = {Influence of WC Particle Morphology on the Microstructure and Performance of Laser-Cladded Ni-Based WC Composite Coatings on 0Cr13Ni5Mo Steel},
  journal = {Lubricants},
  year = {2026},
  volume = {14},
  number = {6},
  pages = {215},
  doi = {10.3390/lubricants14060215}
}
Kostenlos starten →