EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigation on Tribological Performance of Laser Surface Texturing on Silicon Nitride Ceramic Under Hyaluronic Acid Lubrication

Hong-Jian Wang, Jin Wang, Yan-Xian Guo, Bo Wang, Dong-Lin Wu, Huan-Xun Guo

Lubricants · 20.05.2026 · 14 (5) · 211

DOI: 10.3390/lubricants14050211 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Lubricants, online erschienen am 20.05.2026. Verfasst von Hong-Jian Wang und 5 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Scientific Research Platforms and Projects of Ordinary Universities in Guangdong Province, Tri-level Talents Development Project of Zhuhai College of Science and Technology, Guangdong Basic and Applied Basic Research Foundation, Experimental Teaching Demonstration Center for Industrial Robots.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laser surface texturing (LST) was used to process circular patterns on silicon nitride (Si3N4) ceramic. The surface wettability of un-textured and textured Si3N4 ceramic was studied. It was found that all samples were hydrophilic. The hydrophilicity of the textured Si3N4 ceramic with a smaller interval was weaker. Effect of the interval on the tribological performance of Si3N4 ceramic was investigated under different reciprocating frequencies. As the reciprocating frequency increased, the coefficient of friction (COF) of Si3N4 ceramic showed an overall upward trend. And the COFs of textured Si3N4 ceramic were higher. At the reciprocating frequency of 0.5 Hz, the COFs of textured samples with different intervals were relatively close. At higher reciprocating frequency, the difference in COF gradually increased. This can be attributed to the change in lubrication state that occurs during the frictional process. Debris and plough were found at surface of all samples, and the original surface was cleaner. The surface damage of textured samples was more severe than that of un-textured samples. EDS analysis on the wear area was performed. The wear rate of the frictional pair at the interval of 250 μm was higher. It was consistent with the more significant wear marks on the surface of the Si3N4 ceramic at this interval. There were significant differences in the frictional process between un-textured and textured samples. For the un-textured surface, the debris was mainly concentrated at the edges of the friction trajectory. In contrast, textured patterns had the function of storing lubricant, while also generating micro-shear effects on debris and improving the status of lubrication, resulting in more complex frictional process.

Förderung

  • Key Scientific Research Platforms and Projects of Ordinary Universities in Guangdong Province
  • Tri-level Talents Development Project of Zhuhai College of Science and Technology, Guangdong Basic and Applied Basic Research Foundation
  • Experimental Teaching Demonstration Center for Industrial Robots
  • Innovation Training Project for College Students of Zhuhai College of Science and Technology

Zitieren

APA

Wang, H., Wang, J., Guo, Y., Wang, B., Wu, D., & Guo, H. (2026). Investigation on Tribological Performance of Laser Surface Texturing on Silicon Nitride Ceramic Under Hyaluronic Acid Lubrication. Lubricants, 14(5), 211. https://doi.org/10.3390/lubricants14050211

Vancouver

Wang H, Wang J, Guo Y, Wang B, Wu D, Guo H. Investigation on Tribological Performance of Laser Surface Texturing on Silicon Nitride Ceramic Under Hyaluronic Acid Lubrication. Lubricants. 2026;14(5):211. doi:10.3390/lubricants14050211

BibTeX
@article{Wang2026,
  author = {Wang, Hong-Jian and Wang, Jin and Guo, Yan-Xian and Wang, Bo and Wu, Dong-Lin and Guo, Huan-Xun},
  title = {Investigation on Tribological Performance of Laser Surface Texturing on Silicon Nitride Ceramic Under Hyaluronic Acid Lubrication},
  journal = {Lubricants},
  year = {2026},
  volume = {14},
  number = {5},
  pages = {211},
  doi = {10.3390/lubricants14050211}
}
Kostenlos starten →