Kinetics of Growth and Mechanical Characterization of Hard Layers Obtained on the Surface of AISI H13 Steel by the Boriding Process Using a Non-Commercial Mixture
Lubricants · 13.03.2026 · 14 (3) · 124
DOI: 10.3390/lubricants14030124 ↗Kurz gefasst
Fachartikel in der Zeitschrift Lubricants, online erschienen am 13.03.2026. Verfasst von Yesenia Sánchez-Fuentes und 8 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Boriding is a thermochemical process that improves the surface properties of metallic materials, such as wear resistance, hardness, and Young’s modulus. The current work evaluated the kinetics of boride layers formed by boriding on AISI H13 steel. The AISI H13 steel samples were covered with a non-commercial powder mixture of 70% wt. SiC, 20% B4C wt. and 10% wt. KBF4. The samples were treated for 2, 4, and 6 h at 850, 875, and 900 °C, respectively. The growth kinetics of boride layers were estimated as a function of the treatment parameters, using a solution of the second Fick’s Law, as in a parabolic model. Also, the hardness of layers was assessed by Vickers microindentation. Optical examination of the samples showed a biphasic FeB/Fe2B layer at all temperatures after 6 h of treatment. In contrast, those exposed for 2 h exhibited a monophasic Fe2B layer with isolated zones of the FeB phase in all temperatures. The results suggested that the obtained layer thicknesses are highly dependent on the treatment parameters. After 2 h at 850 °C, the samples exhibited a well-defined layer with a thickness of 8.51 ± 1.01 μm, whereas after 6 h it was 24.39 ± 1.01 μm. The activation energy was estimated at 230.63 kJ/mol, with a correlation coefficient (R2) of 0.97, consistent with values reported in the literature. Additionally, the hardness values were estimated to range from 1880 to 2192 HV for the FeB phase and from 1294 to 1715 HV for the Fe2B phase, indicating that the hardness of the boride layers is highly dependent on the treatment conditions.
Zitieren
APA
Sánchez-Fuentes, Y., Carrera-Espinosa, R., Tadeo-Rosas, R., Proa-Coronado, C., Balderas-López, J. A., Linares-Duarte, L. A., Alvarez-Vera, M., Miranda-Hernández, J. G., & Hernández-Sánchez, E. (2026). Kinetics of Growth and Mechanical Characterization of Hard Layers Obtained on the Surface of AISI H13 Steel by the Boriding Process Using a Non-Commercial Mixture. Lubricants, 14(3), 124. https://doi.org/10.3390/lubricants14030124
Vancouver
Sánchez-Fuentes Y, Carrera-Espinosa R, Tadeo-Rosas R, Proa-Coronado C, Balderas-López JA, Linares-Duarte LA, et al. Kinetics of Growth and Mechanical Characterization of Hard Layers Obtained on the Surface of AISI H13 Steel by the Boriding Process Using a Non-Commercial Mixture. Lubricants. 2026;14(3):124. doi:10.3390/lubricants14030124
BibTeX
@article{SnchezFuentes2026,
author = {Sánchez-Fuentes, Yesenia and Carrera-Espinosa, Rafael and Tadeo-Rosas, Raúl and Proa-Coronado, Cintia and Balderas-López, José A. and Linares-Duarte, Luz A. and Alvarez-Vera, Melvyn and Miranda-Hernández, José G. and Hernández-Sánchez, Enrique},
title = {Kinetics of Growth and Mechanical Characterization of Hard Layers Obtained on the Surface of AISI H13 Steel by the Boriding Process Using a Non-Commercial Mixture},
journal = {Lubricants},
year = {2026},
volume = {14},
number = {3},
pages = {124},
doi = {10.3390/lubricants14030124}
}
EUVIMED