EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimizing Sustainable Machining Conditions for Incoloy 800HT Using Twin-Nozzle MQL with Bio-Based Groundnut Oil Lubrication

Ramai Ranjan Panigrahi, Ramanuj Kumar, Ashok Kumar Sahoo, Amlana Panda

Lubricants · 23.07.2025 · 13 (8) · 320

DOI: 10.3390/lubricants13080320 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Lubricants, online erschienen am 23.07.2025. Verfasst von Ramai Ranjan Panigrahi und 3 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 73 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study explores the machinability of Incoloy 800HT (high temperature) under a sustainable lubrication approach, employing a twin-nozzle minimum quantity lubrication (MQL) system with groundnut oil as a green cutting fluid. The evaluation focuses on key performance indicators, including surface roughness, tool flank wear, power consumption, carbon emissions, and chip morphology. Groundnut oil, a biodegradable and nontoxic lubricant, was chosen to enhance environmental compatibility while maintaining effective cutting performance. The Taguchi L16 orthogonal array (three factors and four levels) was utilized to conduct experimental trials to analyze machining characteristics. The best surface quality (surface roughness, Ra = 0.514 µm) was obtained at the lowest depth of cut (0.2 mm), modest feed (0.1 mm/rev), and moderate cutting speed (160 m/min). The higher ranges of flank wear are found under higher cutting speed conditions (320 and 240 m/min), while lower wear values (

Zitieren

APA

Panigrahi, R. R., Kumar, R., Sahoo, A. K., & Panda, A. (2025). Optimizing Sustainable Machining Conditions for Incoloy 800HT Using Twin-Nozzle MQL with Bio-Based Groundnut Oil Lubrication. Lubricants, 13(8), 320. https://doi.org/10.3390/lubricants13080320

Vancouver

Panigrahi RR, Kumar R, Sahoo AK, Panda A. Optimizing Sustainable Machining Conditions for Incoloy 800HT Using Twin-Nozzle MQL with Bio-Based Groundnut Oil Lubrication. Lubricants. 2025;13(8):320. doi:10.3390/lubricants13080320

BibTeX
@article{Panigrahi2025,
  author = {Panigrahi, Ramai Ranjan and Kumar, Ramanuj and Sahoo, Ashok Kumar and Panda, Amlana},
  title = {Optimizing Sustainable Machining Conditions for Incoloy 800HT Using Twin-Nozzle MQL with Bio-Based Groundnut Oil Lubrication},
  journal = {Lubricants},
  year = {2025},
  volume = {13},
  number = {8},
  pages = {320},
  doi = {10.3390/lubricants13080320}
}
Kostenlos starten →