EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of Graphene Nanoplatelets and Nanosized Al4C3 Formation on the Wear Properties of Hot Extruded Al-Based Nanocomposites

Mihail Kolev, Rumyana Lazarova, Veselin Petkov, Rositza Dimitrova

Lubricants · 04.02.2025 · 13 (2) · 67

DOI: 10.3390/lubricants13020067 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Lubricants, online erschienen am 04.02.2025. Verfasst von Mihail Kolev und 3 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: BULGARIAN NATIONAL SCIENCE FUND.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the influence of graphene nanoplatelets (GNPs) and the formation of nanosized Al4C3 on the tribological performance of hot extruded aluminum-based nanocomposites. Al/GNP nanocomposites with varying GNP contents (0, 0.1, 0.5, and 1.1 wt.%) were fabricated through powder metallurgy, including ball milling, compaction, and hot extrusion at 500 °C, which was designed to facilitate the formation of nanosized carbides during the extrusion process. The effect of GNPs and nanosized carbides on the tribological properties of the composites was evaluated using dry friction pin-on-disk tests to assess wear resistance and the coefficient of friction (COF). Microstructural analyses using scanning electron microscopy and energy-dispersive X-ray spectroscopy confirmed the uniform distribution of GNPs and the formation of nanosized Al4C3 in the samples. Incorporating 0.1 wt.% GNPs resulted in the lowest wear mass loss (1.40 mg) while maintaining a stable COF (0.52), attributed to enhanced lubrication and load transfer. Although a higher GNP content (1.1 wt.%) resulted in increased wear due to agglomeration, the nanocomposite still demonstrated superior wear resistance compared to the unreinforced aluminum matrix. These findings underscore the potential of combining nanotechnology with precise processing techniques to enhance the wear and friction properties of aluminum-based composites.

Förderung

  • BULGARIAN NATIONAL SCIENCE FUND

Zitieren

APA

Kolev, M., Lazarova, R., Petkov, V., & Dimitrova, R. (2025). Effects of Graphene Nanoplatelets and Nanosized Al4C3 Formation on the Wear Properties of Hot Extruded Al-Based Nanocomposites. Lubricants, 13(2), 67. https://doi.org/10.3390/lubricants13020067

Vancouver

Kolev M, Lazarova R, Petkov V, Dimitrova R. Effects of Graphene Nanoplatelets and Nanosized Al4C3 Formation on the Wear Properties of Hot Extruded Al-Based Nanocomposites. Lubricants. 2025;13(2):67. doi:10.3390/lubricants13020067

BibTeX
@article{Kolev2025,
  author = {Kolev, Mihail and Lazarova, Rumyana and Petkov, Veselin and Dimitrova, Rositza},
  title = {Effects of Graphene Nanoplatelets and Nanosized Al4C3 Formation on the Wear Properties of Hot Extruded Al-Based Nanocomposites},
  journal = {Lubricants},
  year = {2025},
  volume = {13},
  number = {2},
  pages = {67},
  doi = {10.3390/lubricants13020067}
}
Kostenlos starten →