An Investigation on the High-Temperature Stability and Tribological Properties of Impregnated Graphite
Lubricants · 13.11.2024 · 12 (11) · 388
DOI: 10.3390/lubricants12110388 ↗Kurz gefasst
Fachartikel in der Zeitschrift Lubricants, online erschienen am 13.11.2024. Verfasst von Juying Zhao und 8 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Major Project of China.
Abstract (Originalsprache)
Impregnated graphite is a common material for friction pairs in aeroengine seals, especially at high temperatures. For the convenience of the application of graphite materials in aeroengines, an SRV-4 tribometer and a synchronous thermal analyzer are employed to study the tribological properties and thermal stability of pure, resin-impregnated, metal-impregnated, and phosphate-impregnated graphite against stainless steel from room temperature to 500 °C. The results indicate that impregnations can improve the wear resistance and thermal stability of graphite at high temperatures. Compared with other impregnated graphite materials, the resin-impregnated graphite shows a good friction coefficient and poor wear rate and thermal stability over 300 °C, due to the degradation and oxidation of the resin-and-graphite matrix. The metal- and phosphate-impregnated graphite materials exhibit excellent wear resistance and thermal stability under 500 °C as a result of the protection of the impregnations, while the average friction coefficient of the metal-impregnated graphite is much greater than the phosphate-impregnated graphite, and even reaches 2.14-fold at 300 °C. The wear rates for the graphite impregnated with resin, metal, and phosphate are 235 × 10−7, 7 × 10−7, and 16 × 10−7 mm3N−1m−1 at 500 °C, respectively. Considering all aspects, the phosphate-impregnated graphite exhibits excellent tribological properties and thermal stability.
Förderung
- National Science and Technology Major Project of China
Zitieren
APA
Zhao, J., Xin, Q., Pang, Y., Ning, X., Kong, L., Hu, G., Liu, Y., Chen, H., & Li, Y. (2024). An Investigation on the High-Temperature Stability and Tribological Properties of Impregnated Graphite. Lubricants, 12(11), 388. https://doi.org/10.3390/lubricants12110388
Vancouver
Zhao J, Xin Q, Pang Y, Ning X, Kong L, Hu G, et al. An Investigation on the High-Temperature Stability and Tribological Properties of Impregnated Graphite. Lubricants. 2024;12(11):388. doi:10.3390/lubricants12110388
BibTeX
@article{Zhao2024,
author = {Zhao, Juying and Xin, Qi and Pang, Yunshuang and Ning, Xiao and Kong, Lingcheng and Hu, Guangyang and Liu, Ying and Chen, Haosheng and Li, Yongjian},
title = {An Investigation on the High-Temperature Stability and Tribological Properties of Impregnated Graphite},
journal = {Lubricants},
year = {2024},
volume = {12},
number = {11},
pages = {388},
doi = {10.3390/lubricants12110388}
}
EUVIMED