EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modeling and Validation of the Sealing Performance of High-Pressure Vane Rotary Actuator

Yi Wu, Junjie Zhou, Wenjie Ma, Wenbo Liao

Lubricants · 02.11.2024 · 12 (11) · 381

DOI: 10.3390/lubricants12110381 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Lubricants, online erschienen am 02.11.2024. Verfasst von Yi Wu und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Taishan scholars program, Shandong Provincial Natural Resources Fund Surface Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The EHRA (Electro-Hydraulic Rotary Actuator), using a vane rotary actuator, has the advantages of a high torque density and integration and is expected to become a joint actuator for robots. This research focuses on the sealing characteristics of various parts of a vane rotary actuator. The average Reynolds equation was used to analyze the leakage characteristics at the gap. A detailed theoretical analysis was conducted on the internal leakage mechanism of a vane rotary actuator using an X-ring as the dynamic seal for the rotor vane. According to the path of internal leakage, different sealing forms are considered as a series or parallel, and the Newton iteration method is used to obtain the total internal leakage characteristics of a vane rotary actuator. It was also considered that the deformation of the vane rotary actuator caused a thicker gap, leading to an increase in internal leakage. The calculation results are consistent with the experimental data. The analysis results indicate that when estimating the internal leakage of a vane rotary actuator, it is necessary to take the pressure of the high-pressure chamber and output shaft position as inputs. This research provides a reference for an analysis of the method of internal leakage for vane rotary actuators. It provides theoretical support for designing a vane rotary actuator with more minor internal leakage and a higher volumetric efficiency.

Förderung

  • Taishan scholars program
  • Shandong Provincial Natural Resources Fund Surface Project

Zitieren

APA

Wu, Y., Zhou, J., Ma, W., & Liao, W. (2024). Modeling and Validation of the Sealing Performance of High-Pressure Vane Rotary Actuator. Lubricants, 12(11), 381. https://doi.org/10.3390/lubricants12110381

Vancouver

Wu Y, Zhou J, Ma W, Liao W. Modeling and Validation of the Sealing Performance of High-Pressure Vane Rotary Actuator. Lubricants. 2024;12(11):381. doi:10.3390/lubricants12110381

BibTeX
@article{Wu2024,
  author = {Wu, Yi and Zhou, Junjie and Ma, Wenjie and Liao, Wenbo},
  title = {Modeling and Validation of the Sealing Performance of High-Pressure Vane Rotary Actuator},
  journal = {Lubricants},
  year = {2024},
  volume = {12},
  number = {11},
  pages = {381},
  doi = {10.3390/lubricants12110381}
}
Kostenlos starten →