EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research on Loaded Contact Analysis and Tooth Wear Calculation Method of Cycloid–Pin Gear Reducer

Yongqiang Wang, Bingyang Wei, Zhen Wang, Jianjun Yang, Jiake Xu

Lubricants · 13.10.2023 · 11 (10) · 445

DOI: 10.3390/lubricants11100445 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Lubricants, online erschienen am 13.10.2023. Verfasst von Yongqiang Wang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Long Men laboratory’s leading-edge research project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study establishes the geometric model of cycloid–pin gear meshing transmission based on the multi-tooth meshing characteristics of the cycloid speed reducer. The calculation and analysis of meshing motion parameters of the cycloid speed reducer are carried out. An integrated calculation flow is presented for solving the question of the loaded tooth contact of the cycloid speed reducer by using the elimination clearance method of gradual contact and the quasi-Hertz contact simulation of the tooth surface under loads. The loaded transmission error is obtained, and both the number of pins participating in the meshing and the contact area of tooth surfaces are determined. Using the regression formula of the wear coefficient, the dynamic wear coefficient is quickly solved on the instantaneous contact line of the tooth surface. Thereby, the wear distribution law of two tooth surfaces appears. The results show that there is a singular point in the wear of the pin teeth, with a maximum wear of 100 μm, that seriously affects the meshing accuracy of the tooth surface and thus affects the accuracy and lifespan of the reducer.

Förderung

  • National Natural Science Foundation of China
  • Long Men laboratory’s leading-edge research project

Zitieren

APA

Wang, Y., Wei, B., Wang, Z., Yang, J., & Xu, J. (2023). Research on Loaded Contact Analysis and Tooth Wear Calculation Method of Cycloid–Pin Gear Reducer. Lubricants, 11(10), 445. https://doi.org/10.3390/lubricants11100445

Vancouver

Wang Y, Wei B, Wang Z, Yang J, Xu J. Research on Loaded Contact Analysis and Tooth Wear Calculation Method of Cycloid–Pin Gear Reducer. Lubricants. 2023;11(10):445. doi:10.3390/lubricants11100445

BibTeX
@article{Wang2023,
  author = {Wang, Yongqiang and Wei, Bingyang and Wang, Zhen and Yang, Jianjun and Xu, Jiake},
  title = {Research on Loaded Contact Analysis and Tooth Wear Calculation Method of Cycloid–Pin Gear Reducer},
  journal = {Lubricants},
  year = {2023},
  volume = {11},
  number = {10},
  pages = {445},
  doi = {10.3390/lubricants11100445}
}
Kostenlos starten →