Tribological, Oxidation and Thermal Analysis of Advanced Microwave–Hydrothermal Synthesised Ti3C2Tx MXene as Additives in Outboard Engine Oil
Lubricants · 16.06.2023 · 11 (6) · 264
DOI: 10.3390/lubricants11060264 ↗Kurz gefasst
Fachartikel in der Zeitschrift Lubricants, online erschienen am 16.06.2023. Verfasst von Haizum Aimi Zaharin und 8 weiteren Autor:innen. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 84 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Higher Education Malaysia and Universiti Kebangsaan Malaysia, Sunway University, Malaysia.
Abstract (Originalsprache)
In today’s fast, globalised world, lubrication has become essential in enhancing engine efficiency, including in the marine sector. While the number of fishing vessels increased, so did the environmental pollution issues, due to inefficient engines. An outboard engine oil’s tribological, oxidation and thermal conductivity behaviour play a crucial role in improving the quality of an outboard engine’s life. In this research, Ti3C2Tx MXene nanoparticles with different interlayer spacing were synthesised via an advanced microwave–hydrothermal approach. Later, the nanoparticles were dispersed in TC-W outboard engine oil to formulate the Ti3C2Tx MXene nanolubricant with different concentrations. The results show that nanolubricant with a 0.01 wt.% Ti3C2Tx MXene concentration with higher interlayer spacing reduced the coefficient of friction, and the average wear scar diameter by 14.5% and 6.3%, respectively, compared to the base oil. Furthermore, the nanolubricant with a 0.01 wt.% concentration of the Ti3C2Tx MXene nanoparticle showed an improvement of 54.8% in oxidation induction time compared to the base oil. In addition, MXene nanolubricant established a more than 50% improvement in thermal conductivity compared to the base oil.
Förderung
- Ministry of Higher Education Malaysia and Universiti Kebangsaan Malaysia
- Sunway University, Malaysia
Zitieren
APA
Zaharin, H. A., Ghazali, M. J., Khalid, M., Nagarajan, T., Pin, W. W., Ezzah, F., Gerard, O., Walvekar, R., & Rasheed, A. K. (2023). Tribological, Oxidation and Thermal Analysis of Advanced Microwave–Hydrothermal Synthesised Ti3C2Tx MXene as Additives in Outboard Engine Oil. Lubricants, 11(6), 264. https://doi.org/10.3390/lubricants11060264
Vancouver
Zaharin HA, Ghazali MJ, Khalid M, Nagarajan T, Pin WW, Ezzah F, et al. Tribological, Oxidation and Thermal Analysis of Advanced Microwave–Hydrothermal Synthesised Ti3C2Tx MXene as Additives in Outboard Engine Oil. Lubricants. 2023;11(6):264. doi:10.3390/lubricants11060264
BibTeX
@article{Zaharin2023,
author = {Zaharin, Haizum Aimi and Ghazali, Mariyam Jameelah and Khalid, Mohammad and Nagarajan, Thachnatharen and Pin, Wong Weng and Ezzah, Farah and Gerard, Ong and Walvekar, Rashmi and Rasheed, Abdul Khaliq},
title = {Tribological, Oxidation and Thermal Analysis of Advanced Microwave–Hydrothermal Synthesised Ti3C2Tx MXene as Additives in Outboard Engine Oil},
journal = {Lubricants},
year = {2023},
volume = {11},
number = {6},
pages = {264},
doi = {10.3390/lubricants11060264}
}
EUVIMED