Investigation of Wear Behavior in Self-Lubricating ABS Polymer Composites Reinforced with Glass Fiber/ABS and Glass Fiber/Carbon Fiber/ABS Hybrid
Lubricants · 13.03.2023 · 11 (3) · 131
DOI: 10.3390/lubricants11030131 ↗Kurz gefasst
Fachartikel in der Zeitschrift Lubricants, online erschienen am 13.03.2023. Verfasst von Aravind Dhandapani und 8 weiteren Autor:innen. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Researchers Supporting Project, King Saud University.
Abstract (Originalsprache)
A new hybrid fabrication technique was introduced to manufacture composite laminates made of glass fiber, carbon fiber, and acrylonitrile butadiene styrene (ABS) as the matrix. The fabrication process utilized two different techniques: fused deposition modeling and hot press molding. The composite laminates were produced using five layers of glass fibers to form glass fiber-reinforced composites (GF/ABS) and five layers of glass fiber and carbon fiber to form glass fiber, carbon fiber-reinforced hybrid composites (GF/CF/ABS), with three layers of glass fibers and two layers of carbon fibers. The fabricated composite laminates were subjected to wear testing at velocities of 2 m/s, 3 m/s, and 4 m/s and under loads of 5 N and 10 N. The results indicated that GF/ABS samples had the lowest wear loss at 5 N and a velocity of 4 m/s. Additionally, the GF/CF/ABS hybrid samples had the lowest coefficient of friction (COF) of 0.28 at 4 m/s. The GF/ABS samples also exhibited the lowest friction force of 1.7 at 5 N and a velocity of 4 m/s. The worn samples were analyzed using a scanning electron microscope to examine the fiber-to-matrix adhesion behavior. GF/ABS and GF/CF/ABS composites are widely used in various applications due to their high strength-to-weight ratio and resistance to wear. These materials could be used in automotive parts, sporting goods, and marine applications.
Förderung
- Researchers Supporting Project, King Saud University
Zitieren
APA
Dhandapani, A., Krishnasamy, S., Nagarajan, R., Selvaraj, A. D. A., Thiagamani, S. M. K., Muthukumar, C., Mohammad, F., Al-Lohedan, H. A., & Ismail, S. O. (2023). Investigation of Wear Behavior in Self-Lubricating ABS Polymer Composites Reinforced with Glass Fiber/ABS and Glass Fiber/Carbon Fiber/ABS Hybrid. Lubricants, 11(3), 131. https://doi.org/10.3390/lubricants11030131
Vancouver
Dhandapani A, Krishnasamy S, Nagarajan R, Selvaraj ADA, Thiagamani SMK, Muthukumar C, et al. Investigation of Wear Behavior in Self-Lubricating ABS Polymer Composites Reinforced with Glass Fiber/ABS and Glass Fiber/Carbon Fiber/ABS Hybrid. Lubricants. 2023;11(3):131. doi:10.3390/lubricants11030131
BibTeX
@article{Dhandapani2023,
author = {Dhandapani, Aravind and Krishnasamy, Senthilkumar and Nagarajan, Rajini and Selvaraj, Anto Dilip Albert and Thiagamani, Senthil Muthu Kumar and Muthukumar, Chandrasekar and Mohammad, Faruq and Al-Lohedan, Hamad A. and Ismail, Sikiru Oluwarotimi},
title = {Investigation of Wear Behavior in Self-Lubricating ABS Polymer Composites Reinforced with Glass Fiber/ABS and Glass Fiber/Carbon Fiber/ABS Hybrid},
journal = {Lubricants},
year = {2023},
volume = {11},
number = {3},
pages = {131},
doi = {10.3390/lubricants11030131}
}
EUVIMED