EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Augmentative Plating versus Exchange Intramedullary Nailing for the Treatment of Aseptic Non-Unions of the Femoral Shaft—A Biomechanical Study in a SawboneTM Model

Matthias Georg Walcher, Robert E Day iD, Markus Gesslein iD, Hermann Josef Bail, Markus S Kuster

Journal of Personalized Medicine · 10.04.2023 · 13 (4) · 650

DOI: 10.3390/jpm13040650 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Personalized Medicine, online erschienen am 10.04.2023. Verfasst von Matthias Georg Walcher und 4 weiteren Autor:innen. Beteiligte Einrichtung: OC Würzburg, Oeggstr. 3, 97070 Würzburg, Germany. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Johnson & Johnson (Australia), University of Western Australia, the department of Orthopaedics.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

Non-unions after intramedullary nailing of femoral shaft fractures are a significant problem. Treatment options such as augmenting with plates or exchange nailing have been proposed. The ideal treatment remains controversial.

Methods

Augmentative plating using a 4.5 mm LCP or a 3.2 mm LCP leaving the nail in situ was tested biomechanically and compared to exchange intramedullary nailing in a SawboneTM model of a femoral shaft non-union.

Results

The difference of fracture gap motion in axial testing was small. In rotational testing, the exchange nail allowed for the largest amount of motion. The 4.5 mm augmentative plate was the most stable construct in all loading conditions.

Conclusions

Augmentative plating using a 4.5 mm LCP plate while leaving the nail in situ is biomechanically superior to exchange intramedullary nailing. A small fragment 3.2 mm LCP is undersized and does not reduce fracture motion sufficiently in a femoral shaft non-union.

Schlagwörter

Stichwörter der Autor:innen

additional platebiomechanicsnail in situnon-union long bonenon-union revision

Autor:innen und Institutionen

  • OC Würzburg, Oeggstr. 3, 97070 Würzburg, Germany.
  • Department of Orthopedics and Traumatology, Paracelsus Medical University, Breslauer Straße 201, 90471 Nuremberg, Germany.
  • Health Technology Management Unit, Royal Perth Hospital, University of Western Australia, 197 Wellington Street, Perth 6000, Australia.
  • Perth Orthopaedic Sports Medicine Centre, The University of Western Australia, 31 Outram Street, Perth 6005, Australia.

ORCID-Profile: Robert E Day, Markus Gesslein

Förderung

  • Johnson & Johnson (Australia)
  • University of Western Australia
  • the department of Orthopaedics
  • Royal Perth Hospital

Zitieren

APA

Walcher, M. G., Day, R. E., Gesslein, M., Bail, H. J., & Kuster, M. S. (2023). Augmentative Plating versus Exchange Intramedullary Nailing for the Treatment of Aseptic Non-Unions of the Femoral Shaft—A Biomechanical Study in a SawboneTM Model. Journal of Personalized Medicine, 13(4), 650. https://doi.org/10.3390/jpm13040650

Vancouver

Walcher MG, Day RE, Gesslein M, Bail HJ, Kuster MS. Augmentative Plating versus Exchange Intramedullary Nailing for the Treatment of Aseptic Non-Unions of the Femoral Shaft—A Biomechanical Study in a SawboneTM Model. Journal of Personalized Medicine. 2023;13(4):650. doi:10.3390/jpm13040650

BibTeX
@article{Walcher2023,
  author = {Walcher, Matthias Georg and Day, Robert E and Gesslein, Markus and Bail, Hermann Josef and Kuster, Markus S},
  title = {Augmentative Plating versus Exchange Intramedullary Nailing for the Treatment of Aseptic Non-Unions of the Femoral Shaft—A Biomechanical Study in a SawboneTM Model},
  journal = {Journal of Personalized Medicine},
  year = {2023},
  volume = {13},
  number = {4},
  pages = {650},
  doi = {10.3390/jpm13040650}
}
Kostenlos starten →