EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Comparative Evaluation of Mechanical and Physical Properties of Mycelium Composite Boards Made from Lentinus sajor-caju with Various Ratios of Corn Husk and Sawdust

Praween Jinanukul, Jaturong Kumla iD, Worawoot Aiduang, Wandee Thamjaree, Rawiwan Oranratmanee, Umpiga Shummadtayar, Yuttana Tongtuam, Saisamorn Lumyong, Nakarin Suwannarach iD, Tanut Waroonkun iD

Journal of Fungi · 05.09.2024 · 10 (9) · 634

DOI: 10.3390/jof10090634 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Fungi, online erschienen am 05.09.2024. Verfasst von Praween Jinanukul und 9 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Architecture, Chiang Mai University, Chiang Mai 50200, Thailand. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 110 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Chiang Mai University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Mycelium-based composites (MBCs) exhibit varied properties as alternative biodegradable materials that can be used in various industries such as construction, furniture, household goods, and packaging. However, these properties are primarily influenced by the type of substrate used. This study aims to investigate the properties of MBCs produced from Lentinus sajor-caju strain CMU-NK0427 using different ratios of sawdust to corn husk in the development of mycelium composite boards (MCBs) with thicknesses of 8, 16, and 24 mm. The results indicate that variations in the ratios of corn husk to sawdust and thickness affected the mechanical and physical properties of the obtained MCBs. Reducing the corn husk content in the substrate increased the modulus of elasticity, density, and thermal conductivity, while increasing the corn husk content increased the bending strength, shrinkage, water absorption, and volumetric swelling. Additionally, an increase in thickness with the same substrate ratio only indicated an increase in density and shrinkage. MCBs have sound absorption properties ranging from 61 to 94% at a frequency of 1000 Hz. According to the correlation results, a reduction in corn husk content in the substrate has a significant positive effect on the reduction in bending strength, shrinkage, and water absorption in MCBs. However, a decrease in corn husk content shows a strong negative correlation with the increase in the modulus of elasticity, density, and thermal conductivity. The thickness of MCBs with the same substrate ratio only shows a significant negative correlation with the modulus of elasticity and bending strength. Compared to commercial boards, the mechanical (bending strength) and physical (density, thermal conductivity, and sound absorption) properties of MCBs made from a 100% corn husk ratio are most similar to those of softboards and acoustic boards. The results of this study can provide valuable information for the production of MCBs and will serve as a guide to enhance strategies for further improving their properties for commercial manufacturing, as well as fulfilling the long-term goal of eco-friendly recycling of lignocellulosic substrates.

Schlagwörter

Stichwörter der Autor:innen

biodegradable materialslignocellulosic substratemushroom myceliummycelium-based compositeswaste recycling

Autor:innen und Institutionen

  • Faculty of Architecture, Chiang Mai University, Chiang Mai 50200, Thailand.
  • Office of Research Administration, Chiang Mai University, Chiang Mai 50200, Thailand.
  • Department of Biology, Faculty of Science, Chiang Mai University, Chiang Mai 50200, Thailand.
  • Center of Excellence in Microbial Diversity and Sustainable Utilization, Chiang Mai University, Chiang Mai 50200, Thailand.
  • Department of Physics and Materials Science, Faculty of Science, Chiang Mai University, Chiang Mai 50200, Thailand.
  • Academy of Science, The Royal Society of Thailand, Bangkok 10300, Thailand.

ORCID-Profile: Jaturong Kumla, Nakarin Suwannarach, Tanut Waroonkun

Förderung

  • Chiang Mai University

Zitieren

APA

Jinanukul, P., Kumla, J., Aiduang, W., Thamjaree, W., Oranratmanee, R., Shummadtayar, U., Tongtuam, Y., Lumyong, S., Suwannarach, N., & Waroonkun, T. (2024). Comparative Evaluation of Mechanical and Physical Properties of Mycelium Composite Boards Made from Lentinus sajor-caju with Various Ratios of Corn Husk and Sawdust. Journal of Fungi, 10(9), 634. https://doi.org/10.3390/jof10090634

Vancouver

Jinanukul P, Kumla J, Aiduang W, Thamjaree W, Oranratmanee R, Shummadtayar U, et al. Comparative Evaluation of Mechanical and Physical Properties of Mycelium Composite Boards Made from Lentinus sajor-caju with Various Ratios of Corn Husk and Sawdust. Journal of Fungi. 2024;10(9):634. doi:10.3390/jof10090634

BibTeX
@article{Jinanukul2024,
  author = {Jinanukul, Praween and Kumla, Jaturong and Aiduang, Worawoot and Thamjaree, Wandee and Oranratmanee, Rawiwan and Shummadtayar, Umpiga and Tongtuam, Yuttana and Lumyong, Saisamorn and Suwannarach, Nakarin and Waroonkun, Tanut},
  title = {Comparative Evaluation of Mechanical and Physical Properties of Mycelium Composite Boards Made from Lentinus sajor-caju with Various Ratios of Corn Husk and Sawdust},
  journal = {Journal of Fungi},
  year = {2024},
  volume = {10},
  number = {9},
  pages = {634},
  doi = {10.3390/jof10090634}
}
Kostenlos starten →