EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Reaction Capsule Design for Interaction of Heavy Liquid Metal Coolant, Fuel Cladding, and Simulated JOG Phase at Accident Conditions

Doğaç Tarı, Teodora Retegan Vollmer, Christine Geers

Journal of Nuclear Engineering · 06.02.2024 · 5 (1) · 57-73

DOI: 10.3390/jne5010005 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Nuclear Engineering, online erschienen am 06.02.2024. Verfasst von Doğaç Tarı und 2 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Commission.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High temperature corrosion of fuel cladding material (15-15Ti) in high burn-up situations has been an important topic for molten metal-cooled Gen-IV reactors. The present study aims to investigate the simultaneous impact of liquid lead (coolant side) and cesium molybdate (fuel side) on the cladding tube material. A capsule was designed and built for experiments between 600 °C and 1000 °C. In order to simulate a cladding breach scenario, a notch design on the cladding tube was investigated pre- and postexposure. Material thinning by corrosion and leaching at temperatures ≥ 900 °C caused breaches at the notches after 168 h exposure. The temperature dependent cladding thinning phenomenon was used for kinetic interpretation. As the first of a two-part study, this paper will focus on the exposure capsule performance, including metallographic cross-section preparation and preliminary results on the interface chemistry.

Förderung

  • European Commission

Zitieren

APA

Tarı, D., Vollmer, T. R., & Geers, C. (2024). Reaction Capsule Design for Interaction of Heavy Liquid Metal Coolant, Fuel Cladding, and Simulated JOG Phase at Accident Conditions. Journal of Nuclear Engineering, 5(1), 57-73. https://doi.org/10.3390/jne5010005

Vancouver

Tarı D, Vollmer TR, Geers C. Reaction Capsule Design for Interaction of Heavy Liquid Metal Coolant, Fuel Cladding, and Simulated JOG Phase at Accident Conditions. Journal of Nuclear Engineering. 2024;5(1):57-73. doi:10.3390/jne5010005

BibTeX
@article{Tar2024,
  author = {Tarı, Doğaç and Vollmer, Teodora Retegan and Geers, Christine},
  title = {Reaction Capsule Design for Interaction of Heavy Liquid Metal Coolant, Fuel Cladding, and Simulated JOG Phase at Accident Conditions},
  journal = {Journal of Nuclear Engineering},
  year = {2024},
  volume = {5},
  number = {1},
  pages = {57--73},
  doi = {10.3390/jne5010005}
}
Kostenlos starten →