Assessment of Component-Derived Porosity and Resistivity-Based Gas-Hydrate Saturation at the Hikurangi Margin
Journal of Marine Science and Engineering · 18.11.2026 · 14 (22) · 2186
DOI: 10.3390/jmse14222186 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Marine Science and Engineering, online erschienen am 18.11.2026. Verfasst von Bo Wang und 6 weiteren Autor:innen. Die Arbeit nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Gas-hydrate saturation inferred from clay-rich marine sediment logs depends on the porosity definition and electrical calibration. We assess a Formation Component Analysis Program in six IODP Expedition 372/375 logging-while-drilling holes. The weighted component formulation uses density, neutron and gamma-ray responses to constrain component volumes and effective porosity, while an electrical model estimates water saturation. We compare nine saturation equations under common response conditions and examine response weights, formation-water resistivity and an exploratory hydrate-endmember correction; interpreting nonwater pore space as a hydrate remains conditional on the phase model. The selected Archie configuration yields 16,514 valid depth points; the highest hole-mean conditional hydrate-equivalent saturation is 0.038 at U1518B. Of 170 fixed chlorinity pairs, 90 were used for parameter selection and 80 for an internal check without optimizing inter-hole depth shifts. On those 80 points, its RMSE is 0.087 versus 0.084 for a zero-hydrate baseline and it identifies one of nine chlorinity-positive points at a 0.05 threshold. On 75 identical points across four holes, its RMSE is 0.090, compared with 0.258 for a locally reconstructed, uncalibrated expedition-style neutron–Archie curve; 0.087 for a separately train-calibrated neutron–Archie comparator; and 0.087 for the zero baseline. A native-code scan over water-resistivity multipliers 1–16 gives its lowest training-weighted error at multiplier 4. These comparisons clarify how component porosity, electrical calibration and phase assumptions influence saturation estimates and provide an auditable framework for targeted calibration in other marine settings.
Zitieren
APA
Wang, B., Zhao, B., Gao, C., Zhang, C., Song, H., He, C., & He, J. (2026). Assessment of Component-Derived Porosity and Resistivity-Based Gas-Hydrate Saturation at the Hikurangi Margin. Journal of Marine Science and Engineering, 14(22), 2186. https://doi.org/10.3390/jmse14222186
Vancouver
Wang B, Zhao B, Gao C, Zhang C, Song H, He C, et al. Assessment of Component-Derived Porosity and Resistivity-Based Gas-Hydrate Saturation at the Hikurangi Margin. Journal of Marine Science and Engineering. 2026;14(22):2186. doi:10.3390/jmse14222186
BibTeX
@article{Wang2026,
author = {Wang, Bo and Zhao, Bin and Gao, Chuqiao and Zhang, Chong and Song, Hongwei and He, Chunguang and He, Jie},
title = {Assessment of Component-Derived Porosity and Resistivity-Based Gas-Hydrate Saturation at the Hikurangi Margin},
journal = {Journal of Marine Science and Engineering},
year = {2026},
volume = {14},
number = {22},
pages = {2186},
doi = {10.3390/jmse14222186}
}
EUVIMED