EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Factors Controlling the AVO Response of a BSR at a Gas Hydrate–Free Gas Interface

Shuang Mao, Qi Li, Min Qin, Pengqi Liu, Xiafei Lai, Liguo Hu, Jiongfan Wei

Journal of Marine Science and Engineering · 10.11.2026 · 14 (22) · 2131

DOI: 10.3390/jmse14222131 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Marine Science and Engineering, online erschienen am 10.11.2026. Verfasst von Shuang Mao und 6 weiteren Autor:innen. Die Arbeit nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Subglacial Electromagnetic Observation Instrument Development and Field Survey Application, Sanya Science and Technology Special Fund, The Project of Sanya Yazhou Bay Science and Technology City.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The bottom-simulating reflector (BSR) is an important seismic marker of the base of the gas hydrate stability zone and underlying free gas. Its amplitude variation with offset (AVO), expressed here as angle-dependent P–P reflection amplitude, depends on fluid composition, pore structure, clay content, and hydrate occurrence mode. Using a horizontal two-layer model, we compare the effects of hydrate saturation, free-gas saturation, hydrate reservoir porosity, clay content, and the hydrate frame participation fraction fms—the fraction of the total hydrate volume incorporated into the load-bearing solid phase—on BSR AVO responses. Elastic properties are calculated by solid averaging, a reference-constrained frame relation, fluid mixing, and Gassmann substitution. Response trends are checked using the exact Zoeppritz solution and two-dimensional staggered-grid finite-difference time-domain (FDTD) modeling, and the fms responses are compared between two dry-frame models. Increasing hydrate saturation from 0 to 80% changes the numerical intercept from −0.0971 to −0.2361; under uniform Wood mixing, the nonlinear free-gas response is concentrated at low saturation; porosity primarily changes the impedance contrast, whereas clay content primarily changes the amplitude variation with incidence angle. Increasing fms raises velocity, makes the intercept more negative, and increases the gradient, but whether the gradient changes sign depends on the frame model.

Förderung

  • Subglacial Electromagnetic Observation Instrument Development and Field Survey Application
  • Sanya Science and Technology Special Fund
  • The Project of Sanya Yazhou Bay Science and Technology City
  • Key Laboratory of Polar Geology and Marine Mineral Resources

Zitieren

APA

Mao, S., Li, Q., Qin, M., Liu, P., Lai, X., Hu, L., & Wei, J. (2026). Factors Controlling the AVO Response of a BSR at a Gas Hydrate–Free Gas Interface. Journal of Marine Science and Engineering, 14(22), 2131. https://doi.org/10.3390/jmse14222131

Vancouver

Mao S, Li Q, Qin M, Liu P, Lai X, Hu L, et al. Factors Controlling the AVO Response of a BSR at a Gas Hydrate–Free Gas Interface. Journal of Marine Science and Engineering. 2026;14(22):2131. doi:10.3390/jmse14222131

BibTeX
@article{Mao2026,
  author = {Mao, Shuang and Li, Qi and Qin, Min and Liu, Pengqi and Lai, Xiafei and Hu, Liguo and Wei, Jiongfan},
  title = {Factors Controlling the AVO Response of a BSR at a Gas Hydrate–Free Gas Interface},
  journal = {Journal of Marine Science and Engineering},
  year = {2026},
  volume = {14},
  number = {22},
  pages = {2131},
  doi = {10.3390/jmse14222131}
}
Kostenlos starten →