EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development and Characterization of 3D-Printable PA6/Oyster Shell Composites for Potential Oyster Spat Collector Applications

Julia Tetzner, Thomas Potempa, Max Juraschek, Max Ehleben

Journal of Marine Science and Engineering · 08.11.2026 · 14 (21) · 2121

DOI: 10.3390/jmse14212121 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Marine Science and Engineering, online erschienen am 08.11.2026. Verfasst von Julia Tetzner und 3 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Federal Ministry for the Environment, Nature Conservation, Building and Nuclear Safety.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The growing accumulation of plastics in marine environments and their fragmentation into microplastics have increased the demand for durable and sustainable materials for aquaculture applications. Oyster shell waste is particularly attractive because it is an abundant by-product of shellfish aquaculture and consists predominantly of biogenic calcium carbonate (CaCO3), a mineral naturally associated with oyster habitats. This study investigates the feasibility of incorporating oyster shell powder into polyamide 6 (PA6) to produce 3D-printable composites for potential oyster spat collector applications. PA6 composites containing 10, 20, and 30 wt% oyster shell powder were compounded, extruded into filaments, and processed via fused deposition modeling (FDM). The materials were characterized with respect to processability, thermal and mechanical properties, moisture uptake, filler composition, and CaCO3 dissolution behaviour. All formulations showed good processability and were successfully printed into mechanically stable specimens. Increasing filler content increased stiffness but reduced ductility, while melting and crystallization temperatures remained largely stable but influenced enthalpy properties at higher filler loadings. Immersion experiments revealed partial dissolution of the mineral phase, indicating partial CaCO3 dissolution without visible degradation of the PA6 matrix. Overall, the results demonstrate the feasibility of highly filled PA6/oyster shell composites for additive manufacturing and provide a foundation for future studies addressing seawater exposure, oyster larval settlement and field-scale validation.

Förderung

  • Federal Ministry for the Environment, Nature Conservation, Building and Nuclear Safety

Zitieren

APA

Tetzner, J., Potempa, T., Juraschek, M., & Ehleben, M. (2026). Development and Characterization of 3D-Printable PA6/Oyster Shell Composites for Potential Oyster Spat Collector Applications. Journal of Marine Science and Engineering, 14(21), 2121. https://doi.org/10.3390/jmse14212121

Vancouver

Tetzner J, Potempa T, Juraschek M, Ehleben M. Development and Characterization of 3D-Printable PA6/Oyster Shell Composites for Potential Oyster Spat Collector Applications. Journal of Marine Science and Engineering. 2026;14(21):2121. doi:10.3390/jmse14212121

BibTeX
@article{Tetzner2026,
  author = {Tetzner, Julia and Potempa, Thomas and Juraschek, Max and Ehleben, Max},
  title = {Development and Characterization of 3D-Printable PA6/Oyster Shell Composites for Potential Oyster Spat Collector Applications},
  journal = {Journal of Marine Science and Engineering},
  year = {2026},
  volume = {14},
  number = {21},
  pages = {2121},
  doi = {10.3390/jmse14212121}
}
Kostenlos starten →