EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Wind-Resistance Stability Analysis of a Magnetic Adhesion Wall-Climbing Obstacle-Crossing Robot for Offshore Wind Turbines

Jun Liu, Shaojie Jing, Yongsheng Yang, Shiteng Yang

Journal of Marine Science and Engineering · 18.08.2026 · 14 (16) · 1528

DOI: 10.3390/jmse14161528 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Marine Science and Engineering, online erschienen am 18.08.2026. Verfasst von Jun Liu und 3 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Laboratory of Transport Industry of Shipping Technology and Control Engineering.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To address the challenges of adsorption instability and obstacle-crossing difficulties faced by wall-climbing robots in the harsh operation and maintenance (O&M) environment of offshore wind turbine (OWT) towers, this paper presents the design of a magnetic-adhesive wall-climbing robot with a planetary-gear configuration and investigates its wind resistance stability. First, the magnetic circuit layout is optimized through finite element analysis, revealing that the F-16 continuous planetary configuration (16 poles) effectively suppresses magnetic flux leakage and forms an integrated magnetic pad, maintaining adsorption force at a large air gap of 20 mm, thereby enhancing magnetic robustness during obstacle crossing and making it the optimal choice for high-load offshore conditions. Second, an unsteady flow field model based on the Kaimal turbulence spectrum is constructed to analyze aerodynamic loads. Fluid–structure interaction (FSI) simulations demonstrate that at a height of 30 m, the turbulence integral scale matches the robot dimensions, and combined with the Venturi effect of gap jet flow, this leads to peak turbulence intensity and pitching moment, creating a hazardous, pronounced aerodynamic amplification condition. Finally, an anti-slip stability model is established, revealing that vertical wall climbing represents the critical loading scenario; the magnetic adhesion system must deliver a total adsorption force of no less than 1000 N to resist a 35 m/s wind speed under low-friction conditions, providing a quantitative design basis for anti-wind safety. This study integrates magnetic circuit optimization, turbulence-resolved aerodynamics, and macroscopic anti-slip mechanics, offering theoretical support and engineering guidance for the safe deployment of intelligent O&M equipment for offshore wind power. Bench-scale measurements of magnetic adhesion force, friction coefficient, and translation force fluctuation support the exponential-decay magnetic model and the multi-wheel phase-interleaving concept; however, the current 4 × 16-pole prototype delivers ~627 N at the 2 mm working gap, below the 1000 N design target. The design methodology is therefore validated, while the current physical configuration requires further iteration of the working gap or magnet grade before it can be considered operationally adequate.

Förderung

  • Key Laboratory of Transport Industry of Shipping Technology and Control Engineering

Zitieren

APA

Liu, J., Jing, S., Yang, Y., & Yang, S. (2026). Wind-Resistance Stability Analysis of a Magnetic Adhesion Wall-Climbing Obstacle-Crossing Robot for Offshore Wind Turbines. Journal of Marine Science and Engineering, 14(16), 1528. https://doi.org/10.3390/jmse14161528

Vancouver

Liu J, Jing S, Yang Y, Yang S. Wind-Resistance Stability Analysis of a Magnetic Adhesion Wall-Climbing Obstacle-Crossing Robot for Offshore Wind Turbines. Journal of Marine Science and Engineering. 2026;14(16):1528. doi:10.3390/jmse14161528

BibTeX
@article{Liu2026,
  author = {Liu, Jun and Jing, Shaojie and Yang, Yongsheng and Yang, Shiteng},
  title = {Wind-Resistance Stability Analysis of a Magnetic Adhesion Wall-Climbing Obstacle-Crossing Robot for Offshore Wind Turbines},
  journal = {Journal of Marine Science and Engineering},
  year = {2026},
  volume = {14},
  number = {16},
  pages = {1528},
  doi = {10.3390/jmse14161528}
}
Kostenlos starten →