Attitude and Heading Calibration After IMU Reinstallation in Rotational Inertial Navigation Systems Using an Interleaved Rotation-Dwell Sequence
Journal of Marine Science and Engineering · 17.08.2026 · 14 (16) · 1525
DOI: 10.3390/jmse14161525 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Marine Science and Engineering, online erschienen am 17.08.2026. Verfasst von Haoyu Bu und 5 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
To address the degradation in attitude accuracy caused by mismatched rotation-axis tilt parameters after inertial measurement unit (IMU) reinstallation in rotational inertial navigation systems (RINSs) on large marine platforms, an interleaved rotation-dwell attitude-and-heading calibration method is proposed. First, a relative attitude-and-heading model incorporating the combined effects of the rotation-axis tilt errors of the two systems is established, with the horizontal error mapping induced by the relative heading between their base frames explicitly considered. Second, a four-state interleaved rotation-dwell sequence is designed, and the rotation-axis tilt parameters of the two RINSs are separated in closed form through Hadamard orthogonal projection. Simulations verify the parameter-decoupling capability of the proposed method. Experimental results show that, compared to a filtering-based self-calibration method for a single RINS, the proposed method reduces the roll and pitch root-mean-square errors (RMSE) by 90.29% and 41.80%, respectively. After compensation for the rotation-axis tilt errors, relative heading alignment between the two systems is achieved by estimating the residual heading bias. The proposed method provides a system-level solution for attitude-and-heading calibration after IMU reinstallation under moving-base field conditions.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Bu, H., Zha, F., He, H., Li, J., Zhang, C., & Zheng, Q. (2026). Attitude and Heading Calibration After IMU Reinstallation in Rotational Inertial Navigation Systems Using an Interleaved Rotation-Dwell Sequence. Journal of Marine Science and Engineering, 14(16), 1525. https://doi.org/10.3390/jmse14161525
Vancouver
Bu H, Zha F, He H, Li J, Zhang C, Zheng Q. Attitude and Heading Calibration After IMU Reinstallation in Rotational Inertial Navigation Systems Using an Interleaved Rotation-Dwell Sequence. Journal of Marine Science and Engineering. 2026;14(16):1525. doi:10.3390/jmse14161525
BibTeX
@article{Bu2026,
author = {Bu, Haoyu and Zha, Feng and He, Hongyang and Li, Jingshu and Zhang, Chenyang and Zheng, Qun},
title = {Attitude and Heading Calibration After IMU Reinstallation in Rotational Inertial Navigation Systems Using an Interleaved Rotation-Dwell Sequence},
journal = {Journal of Marine Science and Engineering},
year = {2026},
volume = {14},
number = {16},
pages = {1525},
doi = {10.3390/jmse14161525}
}
EUVIMED