PLC-Guided Vibration Measurement and Condition-Aware State Characterization of Quay Crane Hoisting Gearboxes Under Non-Stationary Field Operation
Journal of Marine Science and Engineering · 17.07.2026 · 14 (14) · 1314
DOI: 10.3390/jmse14141314 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Marine Science and Engineering, online erschienen am 17.07.2026. Verfasst von Weiguo Zhang und 6 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Field vibration measurements of quay-crane hoisting gearboxes are difficult to interpret because the measured response is generated under short, load-dependent cycles rather than stationary excitation. This study develops a PLC-guided method for constructing condition-tagged steady-state vibration samples from non-stationary field measurements. Multi-rate records are aligned on a common time basis; work cycles and action stages are identified from load and hoist-speed information; steady PLC candidates are selected using operating-context and local-steadiness criteria; and one-second vibration segments are fine-screened within the corresponding search intervals. The accepted segments are stored in a quality-controlled feature table and characterized by acceleration RMS, 10–1000 Hz velocity RMS, kurtosis, peak-to-peak acceleration, dominant frequency, and spectral entropy. Field data from four gearboxes yielded 1140 steady-state segments and 8912 quality-controlled segment-channel records. Stepwise CV analysis showed that action-only grouping reduced the coefficient of variation from 0.692 to 0.658, while full machine–action–channel grouping reduced it to 0.351, corresponding to a 49.35% reduction. Median acceleration RMS ranged from 0.494 to 4.805 m/s2, and 10–1000 Hz velocity RMS ranged from 0.317 to 1.512 mm/s. The method provides a traceable basis for condition-aware baseline modelling and trend analysis without making unsupported fault-diagnostic claims.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Zhang, W., Ai, M., Zeng, X., Li, M., Wang, D., Shen, Y., & Zhao, N. (2026). PLC-Guided Vibration Measurement and Condition-Aware State Characterization of Quay Crane Hoisting Gearboxes Under Non-Stationary Field Operation. Journal of Marine Science and Engineering, 14(14), 1314. https://doi.org/10.3390/jmse14141314
Vancouver
Zhang W, Ai M, Zeng X, Li M, Wang D, Shen Y, et al. PLC-Guided Vibration Measurement and Condition-Aware State Characterization of Quay Crane Hoisting Gearboxes Under Non-Stationary Field Operation. Journal of Marine Science and Engineering. 2026;14(14):1314. doi:10.3390/jmse14141314
BibTeX
@article{Zhang2026,
author = {Zhang, Weiguo and Ai, Mingfei and Zeng, Xiangkun and Li, Meizhen and Wang, Dongsheng and Shen, Yang and Zhao, Ning},
title = {PLC-Guided Vibration Measurement and Condition-Aware State Characterization of Quay Crane Hoisting Gearboxes Under Non-Stationary Field Operation},
journal = {Journal of Marine Science and Engineering},
year = {2026},
volume = {14},
number = {14},
pages = {1314},
doi = {10.3390/jmse14141314}
}
EUVIMED