EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Parametric Modeling and Hydrodynamic Analysis of Bio-Inspired Propellers with Position- and Height-Controllable Leading-Edge Tubercles

Yufan Cao, Xiaoyi An, Chengshan Li, Jie Bai, Liuzhen Ren, Yuanchao Gao, Zejun Song

Journal of Marine Science and Engineering · 06.07.2026 · 14 (13) · 1250

DOI: 10.3390/jmse14131250 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Marine Science and Engineering, online erschienen am 06.07.2026. Verfasst von Yufan Cao und 6 weiteren Autor:innen. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Guangdong Basic and Applied Basic Research Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Leading-edge tubercles provide a bio-inspired modification for regulating the hydrodynamic performance of marine propellers, but their controllable generation on complex three-dimensional blades remains insufficiently studied. This study develops a parametric modeling method for tubercled leading-edge propellers based on the David Taylor Model Basin (DTMB) 4383 geometry. The method combines B-spline smooth reconstruction with a Gaussian envelope function to control tubercle radial peak position and height. After validation with publicly available open-water experimental data, the computational fluid dynamics (CFD) method is applied to uniform and locally targeted tubercled models. The results show that leading-edge tubercles modify the suction-side low-pressure region and redistribute local blade loading. The radial peak position mainly controls the concentration region of the pressure disturbance, whereas peak height affects its intensity. At the design advance coefficient, moving the target peak from r/R = 0.26 to r/R = 0.92 decreased the thrust coefficient by 0.77% and increased the torque coefficient by 1.75%. For a fixed target position, increasing the maximum amplitude ratio from 0.05 to 0.80 increased the thrust and torque coefficients by 0.25% and 0.88%, respectively. These findings indicate that tubercle design should balance radial position and protrusion height.

Förderung

  • National Natural Science Foundation of China
  • Guangdong Basic and Applied Basic Research Foundation

Zitieren

APA

Cao, Y., An, X., Li, C., Bai, J., Ren, L., Gao, Y., & Song, Z. (2026). Parametric Modeling and Hydrodynamic Analysis of Bio-Inspired Propellers with Position- and Height-Controllable Leading-Edge Tubercles. Journal of Marine Science and Engineering, 14(13), 1250. https://doi.org/10.3390/jmse14131250

Vancouver

Cao Y, An X, Li C, Bai J, Ren L, Gao Y, et al. Parametric Modeling and Hydrodynamic Analysis of Bio-Inspired Propellers with Position- and Height-Controllable Leading-Edge Tubercles. Journal of Marine Science and Engineering. 2026;14(13):1250. doi:10.3390/jmse14131250

BibTeX
@article{Cao2026,
  author = {Cao, Yufan and An, Xiaoyi and Li, Chengshan and Bai, Jie and Ren, Liuzhen and Gao, Yuanchao and Song, Zejun},
  title = {Parametric Modeling and Hydrodynamic Analysis of Bio-Inspired Propellers with Position- and Height-Controllable Leading-Edge Tubercles},
  journal = {Journal of Marine Science and Engineering},
  year = {2026},
  volume = {14},
  number = {13},
  pages = {1250},
  doi = {10.3390/jmse14131250}
}
Kostenlos starten →