EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Triaxial Compression and Unloading Acoustic Emission Characteristics of Coral Block

Yongtao Zhang, Haifeng Liu, Aolin Wu, Peishuai Chen, Qilin Wang, Fuquan Ji

Journal of Marine Science and Engineering · 30.06.2026 · 14 (13) · 1203

DOI: 10.3390/jmse14131203 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Marine Science and Engineering, online erschienen am 30.06.2026. Verfasst von Yongtao Zhang und 5 weiteren Autor:innen. Die Arbeit nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Program of China, Hubei Provincial Natural Science Foundation of China, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigated the mechanical response and instability precursors of highly porous coral blocks from the South China Sea under complex stress paths through conventional triaxial compression tests, two types of triaxial unloading tests, and synchronous acoustic emission (AE) monitoring. The effects of confining pressure, unloading path, and unloading stage on strength, deformation, dilatancy, and failure behavior were examined. The coefficients of variation of dry density, saturated density, porosity, and P-wave velocity were 5.07%, 3.56%, 3.72%, and 5.77%, respectively, indicating relatively limited variability in the measured physical properties, although the influence of specimen heterogeneity cannot be fully excluded. Within the 0–2 MPa confining-pressure range, peak strength increased from 8.81 to 16.85 MPa, whereas axial strain at peak strength changed from 0.33% at 0 MPa to 0.63% at 1 MPa and then decreased to 0.40% at 2 MPa, indicating strong strength sensitivity but a nonmonotonic deformation response. During unloading, all specimens exhibited a transition from compaction to dilatancy. At unloading rates of 0.2 and 0.5 MPa/min, the absolute value of the volumetric strain evolution slope was higher under the increasing-axial-pressure unloading path than under the constant-axial-pressure unloading path, indicating that the path-related difference in dilatancy appears more pronounced under the present test conditions. AE activity increased progressively near peak stress during conventional compression, whereas unloading-induced AE events concentrated near macroscopic failure. Lateral strain anomalies generally preceded AE bursts, suggesting that lateral deformation appears to provide a more sensitive early-warning indicator under the present test conditions.

Förderung

  • National Key R&D Program of China
  • Hubei Provincial Natural Science Foundation of China
  • National Natural Science Foundation of China
  • State Key Laboratory for Tunnel Engineering
  • Research Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering Safety

Zitieren

APA

Zhang, Y., Liu, H., Wu, A., Chen, P., Wang, Q., & Ji, F. (2026). Triaxial Compression and Unloading Acoustic Emission Characteristics of Coral Block. Journal of Marine Science and Engineering, 14(13), 1203. https://doi.org/10.3390/jmse14131203

Vancouver

Zhang Y, Liu H, Wu A, Chen P, Wang Q, Ji F. Triaxial Compression and Unloading Acoustic Emission Characteristics of Coral Block. Journal of Marine Science and Engineering. 2026;14(13):1203. doi:10.3390/jmse14131203

BibTeX
@article{Zhang2026,
  author = {Zhang, Yongtao and Liu, Haifeng and Wu, Aolin and Chen, Peishuai and Wang, Qilin and Ji, Fuquan},
  title = {Triaxial Compression and Unloading Acoustic Emission Characteristics of Coral Block},
  journal = {Journal of Marine Science and Engineering},
  year = {2026},
  volume = {14},
  number = {13},
  pages = {1203},
  doi = {10.3390/jmse14131203}
}
Kostenlos starten →