EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multi-Objective Optimization Method for Marine Propulsion Shaft Alignment Under Multiple Operating Conditions

Shuzhe Wang, Zhongxu Tian, Shouqi Cao

Journal of Marine Science and Engineering · 15.06.2026 · 14 (12) · 1101

DOI: 10.3390/jmse14121101 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Marine Science and Engineering, online erschienen am 15.06.2026. Verfasst von Shuzhe Wang und 2 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China during the 14th Five-Year Plan period.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Marine propulsion shaft alignment is affected by bearing offsets, hull deformation, thermal growth, and condition-dependent propeller and gear loads. An alignment scheme optimized for a single condition may therefore lead to unbalanced bearing reactions or excessive shaft-line deformation in service. To improve multi-condition alignment performance while reducing the reliance on repeated direct finite element evaluations during optimization, this study proposes a hybrid surrogate-assisted multi-objective optimization framework for a container-ship propulsion shafting system. A beam finite element model based on Euler–Bernoulli theory is established and numerically checked using jack-up calculations. Cold static, hot operating, and zero-pitch conditions are considered. Bearing-load uniformity, maximum coupling vertical offset, and maximum shaft slope are selected as objectives. According to response characteristics, an extremely randomized trees model is used for the nonlinear load-uniformity response, whereas response surface models are used for the smoother coupling-offset and shaft-slope responses. The Pareto front is obtained using multi-objective particle swarm optimization, and a compromise scheme is selected using entropy-weighted TOPSIS. For the investigated case, the preferred scheme reduces the three objectives by 44.36%, 38.62%, and 8.65%, respectively, relative to the pre-optimization scheme, and finite element recalculation gives prediction deviations below 5%. The proposed framework provides a practical reference for propulsion shaft alignment optimization under operating conditions.

Förderung

  • National Key Research and Development Program of China during the 14th Five-Year Plan period

Zitieren

APA

Wang, S., Tian, Z., & Cao, S. (2026). Multi-Objective Optimization Method for Marine Propulsion Shaft Alignment Under Multiple Operating Conditions. Journal of Marine Science and Engineering, 14(12), 1101. https://doi.org/10.3390/jmse14121101

Vancouver

Wang S, Tian Z, Cao S. Multi-Objective Optimization Method for Marine Propulsion Shaft Alignment Under Multiple Operating Conditions. Journal of Marine Science and Engineering. 2026;14(12):1101. doi:10.3390/jmse14121101

BibTeX
@article{Wang2026,
  author = {Wang, Shuzhe and Tian, Zhongxu and Cao, Shouqi},
  title = {Multi-Objective Optimization Method for Marine Propulsion Shaft Alignment Under Multiple Operating Conditions},
  journal = {Journal of Marine Science and Engineering},
  year = {2026},
  volume = {14},
  number = {12},
  pages = {1101},
  doi = {10.3390/jmse14121101}
}
Kostenlos starten →