Dynamic Modeling and Noise Prediction Analysis of Composite Material Rim-Driven Thruster
Journal of Marine Science and Engineering · 28.05.2026 · 14 (11) · 995
DOI: 10.3390/jmse14110995 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Marine Science and Engineering, online erschienen am 28.05.2026. Verfasst von Chunyu Zhang und 4 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The rim-driven thruster (RDT) adopts a shaftless design, thus eliminating the mechanical excitation and frictional noise caused by shaft movement. In this study, dynamic and noise prediction models of the composite-material RDT have been developed, and numerical examples are given to study the characteristics of radiated-noise RDTs. Studies have shown that the layup method of composite materials has a significant impact on the natural frequency of the blade’s free vibration and further affects the spectral characteristics of the RDT flow-induced noise. In the low-frequency range, the flow-induced load has not yet caused the blade to vibrate, and the noise is mainly hydrodynamic noise. As the frequency increases, the blade starts to vibrate, and a distinct flow-induced vibration spectral pattern is observed. Compared with metal blades, composite material blades can effectively suppress the amplitude of the flow-induced noise spectrum and reduce the total noise of the propeller. The composite RDT generally exhibits lower noise levels than the metal RDT, with a difference of approximately 10 dB observed at the resonance frequency. By comparing the three RDTs with different fiber layer-ups, it can be observed that the fiber-laying angles have a direct impact on the resonance characteristics of the blade and its flow-induced noise. It can be concluded that composite materials have significant potential in the low-noise design of RDT, and a reasonable layup design of the blades can achieve excellent noise-control effects.
Zitieren
APA
Zhang, C., Zhao, J., Yang, H., Xue, Y., & Peng, Z. (2026). Dynamic Modeling and Noise Prediction Analysis of Composite Material Rim-Driven Thruster. Journal of Marine Science and Engineering, 14(11), 995. https://doi.org/10.3390/jmse14110995
Vancouver
Zhang C, Zhao J, Yang H, Xue Y, Peng Z. Dynamic Modeling and Noise Prediction Analysis of Composite Material Rim-Driven Thruster. Journal of Marine Science and Engineering. 2026;14(11):995. doi:10.3390/jmse14110995
BibTeX
@article{Zhang2026,
author = {Zhang, Chunyu and Zhao, Jianan and Yang, He and Xue, Yaqiang and Peng, Zilong},
title = {Dynamic Modeling and Noise Prediction Analysis of Composite Material Rim-Driven Thruster},
journal = {Journal of Marine Science and Engineering},
year = {2026},
volume = {14},
number = {11},
pages = {995},
doi = {10.3390/jmse14110995}
}
EUVIMED