Optimization of Extreme Design Parameters for Swell-Dominated Waves Using a Gaussian Mixture Model
Journal of Marine Science and Engineering · 27.05.2026 · 14 (11) · 988
DOI: 10.3390/jmse14110988 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Marine Science and Engineering, online erschienen am 27.05.2026. Verfasst von Chao Li und 3 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Laoshan Laboratory, Natural Science Foundation of Shandong Province, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
Environmental condition assessment is essential for the design of floating wind turbines, particularly when determining design sea states that balance safety and economy. The environmental contour method, typically constructed through the Inverse First Order Reliability Method combined with parametric joint distributions, is widely adopted for this purpose. However, conventional models often struggle to adequately characterize complex sea states involving mixed wind and swell systems, which exhibit multimodality and irregular dependence structures. To address this limitation, this study applies the use of Gaussian mixture models (GMM) to construct environmental contours. The GMM-based approach models the joint distribution of environmental variables in a flexible and data-adaptive manner, with the number of mixture components determined by the Bayesian Information Criterion and model parameters estimated via the expectation-maximization algorithm. Compared with the conventional conditional Weibull–Lognormal model, the GMM significantly improves fitting accuracy: the RMSE decreases from approximately 0.06 to below 0.0013, and the R2 increases to nearly 1.000 across all three datasets. The KS and χ2 tests confirm that the GMM adequately fits the observed data at the 0.05 significance level, whereas the baseline model is rejected in several cases. For the 100-year return period, the GMM yields maximum significant wave heights of 4.19–4.55 m with associated peak periods of 18.8–20.3 s, while the baseline model gives 4.02–4.18 m and 14.3–14.6 s, respectively. These quantitative improvements demonstrate that the mixture-based contours capture the intricate characteristics of wind–swell coexisting sea conditions more accurately, leading to enhanced representativeness of extreme sea states. Consequently, the adopted method enables more refined and reliable design sea state assessments for tested datasets, contributing to the optimization of environmental parameter selection for floating wind turbines.
Förderung
- Laoshan Laboratory
- Natural Science Foundation of Shandong Province
- Fundamental Research Funds for the Central Universities
- Qingdao Postdoctoral Applied Research Project
Zitieren
APA
Li, C., Feng, Y., Zhao, Y., & Ma, X. (2026). Optimization of Extreme Design Parameters for Swell-Dominated Waves Using a Gaussian Mixture Model. Journal of Marine Science and Engineering, 14(11), 988. https://doi.org/10.3390/jmse14110988
Vancouver
Li C, Feng Y, Zhao Y, Ma X. Optimization of Extreme Design Parameters for Swell-Dominated Waves Using a Gaussian Mixture Model. Journal of Marine Science and Engineering. 2026;14(11):988. doi:10.3390/jmse14110988
BibTeX
@article{Li2026,
author = {Li, Chao and Feng, Yudong and Zhao, Yuliang and Ma, Xin},
title = {Optimization of Extreme Design Parameters for Swell-Dominated Waves Using a Gaussian Mixture Model},
journal = {Journal of Marine Science and Engineering},
year = {2026},
volume = {14},
number = {11},
pages = {988},
doi = {10.3390/jmse14110988}
}
EUVIMED