EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Determination of Optimal Principal Ship Dimensions Considering EEDI and Operational Efficiency

Bo-Sung Jung, Seung-Ho Ham

Journal of Marine Science and Engineering · 19.05.2026 · 14 (10) · 939

DOI: 10.3390/jmse14100939 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Marine Science and Engineering, online erschienen am 19.05.2026. Verfasst von Bo-Sung Jung und 1 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Government.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The determination of principal dimensions in the early ship design stage requires iterative calculations based on the basis ship particulars and ship owner’s requirements, demanding considerable time and engineering effort. In modern shipbuilding practice, errors introduced at the early design stage carry a high risk of necessitating a complete redesign, particularly under the mandatory EEDI Phase 3 requirements. To address these challenges, this study presents an automated optimization system for the determination of principal dimensions, adopting LBP (Length Between Perpendiculars), B (Breadth), D (Depth), and CB (Block Coefficient) as design variables. The NSGA-II (Non-Dominated Sorting Genetic Algorithm) is employed to minimize total resistance (RT), specific fuel oil consumption (SFOC), and lightweight (LWT) as objective functions, with EEDI Phase 3 compliance and minimum freeboard requirements imposed as design constraints. The developed program was applied to a 114K Aframax Tanker with VLSFO/LNG dual-fuel capability, yielding a reduction in total resistance of approximately 65 kN relative to the basis ship with improved propulsive efficiency and economic feasibility. The proposed methodology is expected to enhance the efficiency of the early ship design process and provide a systematic framework for meeting stringent environmental regulations.

Förderung

  • Korea Government

Zitieren

APA

Jung, B., & Ham, S. (2026). Determination of Optimal Principal Ship Dimensions Considering EEDI and Operational Efficiency. Journal of Marine Science and Engineering, 14(10), 939. https://doi.org/10.3390/jmse14100939

Vancouver

Jung B, Ham S. Determination of Optimal Principal Ship Dimensions Considering EEDI and Operational Efficiency. Journal of Marine Science and Engineering. 2026;14(10):939. doi:10.3390/jmse14100939

BibTeX
@article{Jung2026,
  author = {Jung, Bo-Sung and Ham, Seung-Ho},
  title = {Determination of Optimal Principal Ship Dimensions Considering EEDI and Operational Efficiency},
  journal = {Journal of Marine Science and Engineering},
  year = {2026},
  volume = {14},
  number = {10},
  pages = {939},
  doi = {10.3390/jmse14100939}
}
Kostenlos starten →