EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Numerical Investigation on the Static Lateral Bearing Capacity and Failure Mechanism of Pile–Bucket Foundation

Mohamed A. Frah, Meijuan Xu, Lichen Li, Wenbing Wu, Maha A. Abusogi, Tasneem Idris, Jingliang Ye, Chunbin Wan, Ruqin Luo

Journal of Marine Science and Engineering · 05.03.2026 · 14 (5) · 494

DOI: 10.3390/jmse14050494 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Marine Science and Engineering, online erschienen am 05.03.2026. Verfasst von Mohamed A. Frah und 8 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, ‘CUG Scholar’ Scientific Research Funds at China University of Geosciences, Guangdong Basic and Applied Basic Research Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The pile–bucket foundation, comprising a bucket attached to a single pile, represents an innovative offshore solution for supporting wind turbines. Previous studies on laterally loaded foundations have primarily focused on single piles and pile–bucket systems; however, the effects of bucket size and loading eccentricity on lateral capacity and soil failure mechanisms remain insufficiently understood. This study investigates the lateral performance of pile–bucket foundations in silty sand under static loading conditions. Seven three-dimensional numerical simulations were conducted to evaluate the influence of bucket diameter, embedment depth, and loading eccentricity. Results indicate that pile–bucket foundations achieve 37–60% higher lateral capacity than single piles and 3–4 times the capacity of standalone buckets. Increasing bucket diameter produces more significant improvements than increasing embedment depth, whereas higher loading eccentricity reduces lateral capacity, ranging from an 8% increase to a 10% decrease relative to a single pile. Increases in loading eccentricity, bucket diameter, and embedment depth shift the rotation center upward by approximately 3–9%, compared with a single pile. At the mudline, the bucket resists up to 75% of the lateral load, while the pile carries up to 92% of the moment. Failure mechanisms are dominated by excessive rotation, including wedge-type failure near the mudline and deep rotational soil flow. Increasing bucket diameter or embedment depth raises bending moments by 5–9%, while higher eccentricity amplifies them by 32–50%. A modified analytical formulation incorporating a correction factor of 1.16 improves the prediction of the rotation center position. These findings provide quantitative guidance for the design and optimization of pile–bucket foundations supporting offshore wind turbines.

Förderung

  • National Natural Science Foundation of China
  • ‘CUG Scholar’ Scientific Research Funds at China University of Geosciences
  • Guangdong Basic and Applied Basic Research Foundation
  • Research Project of Engineering Research Centre of Rock–Soil Drilling & Excavation and Protection, Ministry of Education

Zitieren

APA

Frah, M. A., Xu, M., Li, L., Wu, W., Abusogi, M. A., Idris, T., Ye, J., Wan, C., & Luo, R. (2026). Numerical Investigation on the Static Lateral Bearing Capacity and Failure Mechanism of Pile–Bucket Foundation. Journal of Marine Science and Engineering, 14(5), 494. https://doi.org/10.3390/jmse14050494

Vancouver

Frah MA, Xu M, Li L, Wu W, Abusogi MA, Idris T, et al. Numerical Investigation on the Static Lateral Bearing Capacity and Failure Mechanism of Pile–Bucket Foundation. Journal of Marine Science and Engineering. 2026;14(5):494. doi:10.3390/jmse14050494

BibTeX
@article{Frah2026,
  author = {Frah, Mohamed A. and Xu, Meijuan and Li, Lichen and Wu, Wenbing and Abusogi, Maha A. and Idris, Tasneem and Ye, Jingliang and Wan, Chunbin and Luo, Ruqin},
  title = {Numerical Investigation on the Static Lateral Bearing Capacity and Failure Mechanism of Pile–Bucket Foundation},
  journal = {Journal of Marine Science and Engineering},
  year = {2026},
  volume = {14},
  number = {5},
  pages = {494},
  doi = {10.3390/jmse14050494}
}
Kostenlos starten →