EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An Improved Method for Hull Structure Fatigue Crack Growth at Random Loading and Its Application

Ming Zhang, Kaiyan Li, Chun Fang, Guoqing Feng

Journal of Marine Science and Engineering · 01.02.2026 · 14 (3) · 287

DOI: 10.3390/jmse14030287 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Marine Science and Engineering, online erschienen am 01.02.2026. Verfasst von Ming Zhang und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Project of Ministry of Science and Technology of the People’s Republic of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Under random wave loading, the crack growth rate exhibits jump-like cycle-to-cycle variations, which limit the direct use of efficient integration schemes such as the Euler method. In addition, the crack growth life is highly sensitive to the initial crack size and aspect ratio, while the initial defects are often difficult to determine accurately in practice, leading to increased uncertainty in life assessment. To address these issues, a cycle-scaling-based crack size accumulation method for random loading is proposed. A predictor–corrector improved Euler method is then established, and a fourth-order Runge–Kutta scheme incorporating the cycle-scaling transformation is derived. Furthermore, based on spectral analysis theory, a mapping between the wave spectrum and the crack-tip stress intensity factor response spectrum is developed. A stress intensity factor range sequence is generated by concatenating short-term sea states, thereby providing a random loading input that preserves the required statistical characteristics. Finally, a 21,000-TEU container ship is analyzed as a case study to investigate crack growth evolution for different initial aspect ratios. The results show that the crack aspect ratio gradually converges to a particular trend during propagation. A convergent aspect ratio curve is fitted. And a unified life assessment curve is constructed. An equivalent transformation is used to map an arbitrary initial crack shape and size to an equivalent convergent aspect ratio crack. As a result, fatigue life can be rapidly estimated using a single “initial crack size–fatigue life” curve, providing support for crack growth life assessment and the definition of defect acceptance limits for ship hull structures.

Förderung

  • National Key Research and Development Project of Ministry of Science and Technology of the People’s Republic of China

Zitieren

APA

Zhang, M., Li, K., Fang, C., & Feng, G. (2026). An Improved Method for Hull Structure Fatigue Crack Growth at Random Loading and Its Application. Journal of Marine Science and Engineering, 14(3), 287. https://doi.org/10.3390/jmse14030287

Vancouver

Zhang M, Li K, Fang C, Feng G. An Improved Method for Hull Structure Fatigue Crack Growth at Random Loading and Its Application. Journal of Marine Science and Engineering. 2026;14(3):287. doi:10.3390/jmse14030287

BibTeX
@article{Zhang2026,
  author = {Zhang, Ming and Li, Kaiyan and Fang, Chun and Feng, Guoqing},
  title = {An Improved Method for Hull Structure Fatigue Crack Growth at Random Loading and Its Application},
  journal = {Journal of Marine Science and Engineering},
  year = {2026},
  volume = {14},
  number = {3},
  pages = {287},
  doi = {10.3390/jmse14030287}
}
Kostenlos starten →