EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of CFD Modelling Parameters on Air Injection Behaviour in Ship Air Lubrication Systems

Gyeongseo Min, Haechan Yun, Younguk Do, Kangmin Kim, Keounghyun Jung, Saishuai Dai, Mehmet Atlar, Daejeong Kim, Seungnam Kim, Sanghyun Kim, Soonseok Song

Journal of Marine Science and Engineering · 22.01.2026 · 14 (2) · 234

DOI: 10.3390/jmse14020234 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Marine Science and Engineering, online erschienen am 22.01.2026. Verfasst von Gyeongseo Min und 10 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Inha University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In response to the International Maritime Organization’s strengthened regulations on carbon emissions, the introduction of novel eco-friendly technologies for ship operators has become necessary. In this context, various energy saving devices such as wind-assisted propulsion systems (e.g., wing/rotor sails), propeller-rudder efficiency enhancers (e.g., pre-swirl stators or ducted propellers), and the gate rudder system have been proposed. Among various energy-saving technologies, the air lubrication system has been widely investigated as an effective means of reducing hull frictional resistance through air injection beneath the hull. The performance of air lubrication systems can be evaluated through experimental testing or computational fluid dynamics (CFD) simulations. However, accurately simulating air lubrication systems in CFD remains challenging. Therefore, this study aims to quantitatively evaluate the influence of numerical parameters on the CFD implementation of air lubrication systems. To evaluate these influences, CFD simulations employing the unsteady Reynolds-averaged Navier–Stokes (URANS) method were conducted to investigate air layer formation and sweep angle on a flat plate. The numerical predictions were systematically compared with experimental results by varying key numerical parameters. These quantitative estimations of the effects of numerical variables are expected to serve as a useful benchmark for CFD simulations of air lubrication systems.

Förderung

  • Inha University

Zitieren

APA

Min, G., Yun, H., Do, Y., Kim, K., Jung, K., Dai, S., Atlar, M., Kim, D., Kim, S., Kim, S., & Song, S. (2026). Influence of CFD Modelling Parameters on Air Injection Behaviour in Ship Air Lubrication Systems. Journal of Marine Science and Engineering, 14(2), 234. https://doi.org/10.3390/jmse14020234

Vancouver

Min G, Yun H, Do Y, Kim K, Jung K, Dai S, et al. Influence of CFD Modelling Parameters on Air Injection Behaviour in Ship Air Lubrication Systems. Journal of Marine Science and Engineering. 2026;14(2):234. doi:10.3390/jmse14020234

BibTeX
@article{Min2026,
  author = {Min, Gyeongseo and Yun, Haechan and Do, Younguk and Kim, Kangmin and Jung, Keounghyun and Dai, Saishuai and Atlar, Mehmet and Kim, Daejeong and Kim, Seungnam and Kim, Sanghyun and Song, Soonseok},
  title = {Influence of CFD Modelling Parameters on Air Injection Behaviour in Ship Air Lubrication Systems},
  journal = {Journal of Marine Science and Engineering},
  year = {2026},
  volume = {14},
  number = {2},
  pages = {234},
  doi = {10.3390/jmse14020234}
}
Kostenlos starten →