EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Weather Routing Optimisation for Ships with Wind-Assisted Propulsion

Ageliki Kytariolou, Nikos Themelis

Journal of Marine Science and Engineering · 09.01.2026 · 14 (2) · 148

DOI: 10.3390/jmse14020148 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Marine Science and Engineering, online erschienen am 09.01.2026. Verfasst von Ageliki Kytariolou und 1 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union’s Horizon Europe Research and Innovation Program.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Wind-assisted ship propulsion (WASP) has gained considerable interest as a means of reducing fuel consumption and Greenhouse Gas (GHG) emissions, with further benefits when combined with weather-optimized routing. This study employs and extends a National Technical University of Athens (NTUA) weather-routing optimization tool to more realistically assess WASP performance through integrated modeling. The original tool minimized fuel consumption using forecasted weather data and a physics-based performance model. A previous extension to account for the WASP effect introduced a 1-Degree Of Freedom (DOF) model that accounted only for longitudinal hydrodynamic and aerodynamic forces, estimating the reduced main-engine power required to maintain speed in given conditions. The current study incorporates a 3-DOF model that includes side forces and yaw moments, capturing resulting drift and rudder deflection effects. A Kamsarmax bulk carrier equipped with suction sails served as the case study. Initial simulations across various operating and weather conditions compared the two models. The 1-DOF model predicted fuel-saving potential up to 26% for the tested apparent wind speed and the range of possible headings, whereas the 3-DOF model indicated that transverse effects reduce WASP benefits by 2–7%. Differences in Main Engine (ME) power estimates between the two models reached up to 7% Maximum Continuous Rating (MCR) depending on the speed of wind. The study then applied both models within a weather-routing optimization framework to assess whether the optimal routes produced by each model differ and to quantify performance losses. It was found that the revised optimal route derived from the 3-DOF model improved total Fuel Oil Consumption (FOC) savings by 1.25% compared with the route optimized using the 1-DOF model when both were evaluated with the 3-DOF model.

Förderung

  • European Union’s Horizon Europe Research and Innovation Program

Zitieren

APA

Kytariolou, A., & Themelis, N. (2026). Weather Routing Optimisation for Ships with Wind-Assisted Propulsion. Journal of Marine Science and Engineering, 14(2), 148. https://doi.org/10.3390/jmse14020148

Vancouver

Kytariolou A, Themelis N. Weather Routing Optimisation for Ships with Wind-Assisted Propulsion. Journal of Marine Science and Engineering. 2026;14(2):148. doi:10.3390/jmse14020148

BibTeX
@article{Kytariolou2026,
  author = {Kytariolou, Ageliki and Themelis, Nikos},
  title = {Weather Routing Optimisation for Ships with Wind-Assisted Propulsion},
  journal = {Journal of Marine Science and Engineering},
  year = {2026},
  volume = {14},
  number = {2},
  pages = {148},
  doi = {10.3390/jmse14020148}
}
Kostenlos starten →