EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Seawater Flow-Freezing Characteristics in Open Container Injection Under Low-Temperature Conditions

Yuhao Fan, Bei Peng, Puyu Jiang, Jiahui Ren, Yuesen Lin, Longlong Gao, Baoren Li

Journal of Marine Science and Engineering · 01.12.2025 · 13 (12) · 2289

DOI: 10.3390/jmse13122289 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Marine Science and Engineering, online erschienen am 01.12.2025. Verfasst von Yuhao Fan und 6 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The phenomenon of seawater flow-freezing exists during ballast water injection and drainage in polar vessels, but the heat transfer and ice evolution behaviors under low-temperature flow conditions remain unclear. This study developed a computational model for ballast tank freezing using the volume of fluid (VOF) and enthalpy–porosity method, and constructed a scaled experimental platform for the simulation model validation. Based on this model, the flow-heat transfer and ice evolution process in the ballast tank are analyzed in detail, with a focus on the influence of injection velocity, pipe diameter, and position on seawater freezing characteristics. The results show that during low-temperature water injection, phase change occurs preferentially in the tank bottom region, with ice presenting as a slurry morphology; when injection velocity increases from 0.25 m/s to 3.5 m/s, the maximum ice-phase volume fraction increases by 48.9%, indicating faster flow accelerates phase-change freezing; compared to other diameters, DN150 piping exhibits the highest turbulent kinetic energy (0.054 m2/s2) and the maximum shear stress (12.49 Pa), demonstrating optimal freezing resistance; compared to bottom injection, sidewall injection intensifies heat transfer/icing near tank walls and increases ice-clogging risk around ports. This study reveals intrinsic mechanisms of dynamic ice-blockage evolution, providing theoretical basis for anti-clogging design in polar ship systems.

Zitieren

APA

Fan, Y., Peng, B., Jiang, P., Ren, J., Lin, Y., Gao, L., & Li, B. (2025). Seawater Flow-Freezing Characteristics in Open Container Injection Under Low-Temperature Conditions. Journal of Marine Science and Engineering, 13(12), 2289. https://doi.org/10.3390/jmse13122289

Vancouver

Fan Y, Peng B, Jiang P, Ren J, Lin Y, Gao L, et al. Seawater Flow-Freezing Characteristics in Open Container Injection Under Low-Temperature Conditions. Journal of Marine Science and Engineering. 2025;13(12):2289. doi:10.3390/jmse13122289

BibTeX
@article{Fan2025,
  author = {Fan, Yuhao and Peng, Bei and Jiang, Puyu and Ren, Jiahui and Lin, Yuesen and Gao, Longlong and Li, Baoren},
  title = {Seawater Flow-Freezing Characteristics in Open Container Injection Under Low-Temperature Conditions},
  journal = {Journal of Marine Science and Engineering},
  year = {2025},
  volume = {13},
  number = {12},
  pages = {2289},
  doi = {10.3390/jmse13122289}
}
Kostenlos starten →