Numerical Comparison of Piston-, Flap-, and Double-Flap-Type Wave Makers in a Numerical Wave Tank
Journal of Marine Science and Engineering · 28.11.2025 · 13 (12) · 2273
DOI: 10.3390/jmse13122273 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Marine Science and Engineering, online erschienen am 28.11.2025. Verfasst von Kaicheng Yan und 3 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Interior and Safety.
Abstract (Originalsprache)
In naval and ocean engineering, accurate simulation of incident waves is essential for predicting the motion response of offshore structures. Traditional wave generation methods, such as piston- and flap-type wave makers, often face challenges in accurately replicating the orbital motion of water particles beneath the free surface, which can limit their applicability in high-fidelity simulations. In this study, a numerical investigation is conducted to compare the performance of piston-type, flap-type, and double-flap-type wave makers using STAR-CCM+2310(18.06.006-R8). The influence of water depth on wave height accuracy is evaluated across different measurement locations within a numerical wave tank. Theoretical analysis of wave generation mechanisms is incorporated to clarify the applicability limits of linear theory and to better interpret the numerical results. Results indicate that, under the tested two-dimensional CFD conditions, the double-flap-type wave maker tended to provide closer agreement with theoretical predictions, particularly at greater depths, compared with conventional methods. These findings suggest potential advantages of the double-flap configuration and provide insights for refining wave generation techniques in numerical and experimental wave tanks, thereby supporting more reliable hydrodynamic analyses of floating structures.
Förderung
- Ministry of Interior and Safety
Zitieren
APA
Yan, K., Dou, H., Oh, J., & Seo, D. (2025). Numerical Comparison of Piston-, Flap-, and Double-Flap-Type Wave Makers in a Numerical Wave Tank. Journal of Marine Science and Engineering, 13(12), 2273. https://doi.org/10.3390/jmse13122273
Vancouver
Yan K, Dou H, Oh J, Seo D. Numerical Comparison of Piston-, Flap-, and Double-Flap-Type Wave Makers in a Numerical Wave Tank. Journal of Marine Science and Engineering. 2025;13(12):2273. doi:10.3390/jmse13122273
BibTeX
@article{Yan2025,
author = {Yan, Kaicheng and Dou, Haoyu and Oh, Jungkeun and Seo, Daewon},
title = {Numerical Comparison of Piston-, Flap-, and Double-Flap-Type Wave Makers in a Numerical Wave Tank},
journal = {Journal of Marine Science and Engineering},
year = {2025},
volume = {13},
number = {12},
pages = {2273},
doi = {10.3390/jmse13122273}
}
EUVIMED