Investigation of Sediment Erosion of the Top Cover in the Francis Turbine Guide Vanes at the Genda Power Station
Journal of Marine Science and Engineering · 07.10.2025 · 13 (10) · 1923
DOI: 10.3390/jmse13101923 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Marine Science and Engineering, online erschienen am 07.10.2025. Verfasst von Xudong Lu und 6 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The State Grid Sichuan Electric Power Company Science & Technology Project.
Abstract (Originalsprache)
This study utilizes the Standard k-ε turbulence model and ANSYS CFX software to tackle silt erosion in the top cover clearances of guide vane of the Francis turbine at Genda Power Station (Minjiang River Basin section, 103°17′ E and 31°06′ N) under sediment-laden flow conditions. A numerical simulation of a solid–liquid two-phase flow along the whole flow route was performed under rated operating circumstances to examine the impact of varying guide vane end clearance heights (0.3 mm, 0.5 mm, and 1.0 mm) on internal flow patterns and sediment erosion characteristics. The simulation parameters employed an average sediment concentration of 2.9 kg/m3 and a median particle size of 0.058 mm, indicative of the flood season. The findings demonstrate that augmenting the clearance height intensifies leaky flow and secondary flow, resulting in a 0.49% reduction in efficiency. As the gap expanded from 0.3 mm to 1.0 mm, the leakage flow velocity notably increased to 40 m/s, exacerbating flow separation, enlarging the vortex structures in the vaneless space, and augmenting the sediment velocity gradient and concentration, consequently heightening the risk of erosion. An experimental setup was devised based on the numerical results, and the dynamic resemblance between the constructed test section and the prototype turbine was confirmed for flow velocity, concentration, and Reynolds number. Tests on sediment erosion revealed that the erosion resistance of the anti-sediment erosion material 04Cr13Ni5Mo markedly exceeded that of the base cast steel, especially in high-velocity areas. This study delivers a systematic, quantitative analysis of clearance effects on flow and erosion, along with an experimental wear model specifically for the Gengda Power Station, thereby providing direct theoretical support and engineering guidance for its wear protection strategy and maintenance planning.
Förderung
- The State Grid Sichuan Electric Power Company Science & Technology Project
Zitieren
APA
Lu, X., Xu, K., Li, T., Xiao, Y., Hu, K., Xu, Y., & Liu, X. (2025). Investigation of Sediment Erosion of the Top Cover in the Francis Turbine Guide Vanes at the Genda Power Station. Journal of Marine Science and Engineering, 13(10), 1923. https://doi.org/10.3390/jmse13101923
Vancouver
Lu X, Xu K, Li T, Xiao Y, Hu K, Xu Y, et al. Investigation of Sediment Erosion of the Top Cover in the Francis Turbine Guide Vanes at the Genda Power Station. Journal of Marine Science and Engineering. 2025;13(10):1923. doi:10.3390/jmse13101923
BibTeX
@article{Lu2025,
author = {Lu, Xudong and Xu, Kang and Li, Tianlin and Xiao, Yu and Hu, Kailiang and Xu, Yaogang and Liu, Xiaobing},
title = {Investigation of Sediment Erosion of the Top Cover in the Francis Turbine Guide Vanes at the Genda Power Station},
journal = {Journal of Marine Science and Engineering},
year = {2025},
volume = {13},
number = {10},
pages = {1923},
doi = {10.3390/jmse13101923}
}
EUVIMED