EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Free-Drop Experimental and Simulation Study on the Ultimate Bearing Capacity of Stiffened Plates with Different Stiffnesses under Slamming Loads

Jinsong Xia, Zhanyang Chen, Nan Zhao, Weidong Zhao, Qin Tang, Shijian Cai

Journal of Marine Science and Engineering · 31.07.2024 · 12 (8) · 1291

DOI: 10.3390/jmse12081291 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Marine Science and Engineering, online erschienen am 31.07.2024. Verfasst von Jinsong Xia und 5 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: State Key Laboratory of Structural Analysis, Optimization and CAE Software for Industrial Equipment, Dalian University of Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Differing from previous studies on free-drop tests, this study focuses on the ultimate bearing capacity and failure mechanism of the ship’s bow under slamming loads. A prototype ship’s bow is selected to design two simplified stiffened plates with different stiffeners, and the lateral slamming loads used are equivalent to flare slamming loads. Free-drop tests of the two simplified models are conducted, and the test setups and procedures are provided. The experimental results of slamming pressures and structural responses are obtained. By comparing with the simulation results obtained by Arbitrary Lagrangian-Eulerian (ALE) fluid–structure coupling, the convergence study, symmetry, and independence verifications are carried out. Finally, the dynamic ultimate bearing capacity of stiffened plates with different stiffnesses under lateral slamming loads is studied. The results show that stiffeners enhance the ability of stiffened plates to resist plastic deformation under slamming loads, and T-section stiffeners can provide greater resistance to plastic deformation than other types.

Förderung

  • State Key Laboratory of Structural Analysis, Optimization and CAE Software for Industrial Equipment, Dalian University of Technology

Zitieren

APA

Xia, J., Chen, Z., Zhao, N., Zhao, W., Tang, Q., & Cai, S. (2024). Free-Drop Experimental and Simulation Study on the Ultimate Bearing Capacity of Stiffened Plates with Different Stiffnesses under Slamming Loads. Journal of Marine Science and Engineering, 12(8), 1291. https://doi.org/10.3390/jmse12081291

Vancouver

Xia J, Chen Z, Zhao N, Zhao W, Tang Q, Cai S. Free-Drop Experimental and Simulation Study on the Ultimate Bearing Capacity of Stiffened Plates with Different Stiffnesses under Slamming Loads. Journal of Marine Science and Engineering. 2024;12(8):1291. doi:10.3390/jmse12081291

BibTeX
@article{Xia2024,
  author = {Xia, Jinsong and Chen, Zhanyang and Zhao, Nan and Zhao, Weidong and Tang, Qin and Cai, Shijian},
  title = {Free-Drop Experimental and Simulation Study on the Ultimate Bearing Capacity of Stiffened Plates with Different Stiffnesses under Slamming Loads},
  journal = {Journal of Marine Science and Engineering},
  year = {2024},
  volume = {12},
  number = {8},
  pages = {1291},
  doi = {10.3390/jmse12081291}
}
Kostenlos starten →