EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of Influencing Factors in Cleaning Performance for Bio-Fouling Removal Based on High-Pressure Water Jets

Jaehyeon Ahn, Kaicheng Yan, Salim Abdullah Bazher, Jungkeun Oh, Daewon Seo, Su-gil Cho, Hyungwoo Kim

Journal of Marine Science and Engineering · 27.06.2024 · 12 (7) · 1086

DOI: 10.3390/jmse12071086 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Marine Science and Engineering, online erschienen am 27.06.2024. Verfasst von Jaehyeon Ahn und 6 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Institute of Marine Science & Technology Promotion (KIMST).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Regular inspections and hull cleanings are essential to prevent bio-fouling on ships. However, traditional cleaning methods such as brush cleaning and high-pressure water-jet cleaning at docks are ineffective in cleaning niche areas like bow thrusters and sea chests. Consequently, cleaning robots based on brushes and water jets have been developed to effectively remove bio-fouling. However, there are concerns that brushes may damage hull coatings, allowing bio-fouling to penetrate the damaged areas. In this study, removal experiments were conducted to identify the most dominant factor in fouling removal using water jet-based cleaning, in preparation for the development of non-contact cavitation high-pressure water jet-cleaning robots. The Taguchi method was used to identify influential factors and generate experimental conditions, and equipment systems for the removal experiments were established. Image analysis was performed to assess the bio-fouling occurrences on each specimen before and after cleaning, and numerical simulations of the nozzle were conducted to estimate stagnation pressure and wall shear stress to confirm the effect on micro-fouling removal. The results indicated that pump pressure is the most influential factor in removing large bio-fouling organisms grown in marine environments and on ship surfaces.

Förderung

  • Korea Institute of Marine Science & Technology Promotion (KIMST)

Zitieren

APA

Ahn, J., Yan, K., Bazher, S. A., Oh, J., Seo, D., Cho, S., & Kim, H. (2024). Evaluation of Influencing Factors in Cleaning Performance for Bio-Fouling Removal Based on High-Pressure Water Jets. Journal of Marine Science and Engineering, 12(7), 1086. https://doi.org/10.3390/jmse12071086

Vancouver

Ahn J, Yan K, Bazher SA, Oh J, Seo D, Cho S, et al. Evaluation of Influencing Factors in Cleaning Performance for Bio-Fouling Removal Based on High-Pressure Water Jets. Journal of Marine Science and Engineering. 2024;12(7):1086. doi:10.3390/jmse12071086

BibTeX
@article{Ahn2024,
  author = {Ahn, Jaehyeon and Yan, Kaicheng and Bazher, Salim Abdullah and Oh, Jungkeun and Seo, Daewon and Cho, Su-gil and Kim, Hyungwoo},
  title = {Evaluation of Influencing Factors in Cleaning Performance for Bio-Fouling Removal Based on High-Pressure Water Jets},
  journal = {Journal of Marine Science and Engineering},
  year = {2024},
  volume = {12},
  number = {7},
  pages = {1086},
  doi = {10.3390/jmse12071086}
}
Kostenlos starten →