EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Production Behavior of Hydrate-Bearing Sediments with Mixed Fracture- and Pore-Filling Hydrates

Yaobin Li, Xin Xin, Tianfu Xu, Yingqi Zang, Zimeng Yu, Huixing Zhu, Yilong Yuan

Journal of Marine Science and Engineering · 29.06.2023 · 11 (7) · 1321

DOI: 10.3390/jmse11071321 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Marine Science and Engineering, online erschienen am 29.06.2023. Verfasst von Yaobin Li und 6 weiteren Autor:innen. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Jilin Scientific and Technological Development Program, International Cooperation Key Laboratory of Underground Energy Development and Geological Restoration.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Most hydrate-bearing sediments worldwide exhibit mixed pore- and fracture-filling hydrates. Due to the high exploitation value, pore-filling hydrate production is the focus of current hydrate production research, and there is a lack of systematic research on the decomposition of fracture-filling hydrates and their effects on the evolution of temperature and pressure in hydrate-bearing sediments. If only the decomposition characteristics of pore-filling hydrates are studied while the fracture-filling hydrates decomposition and its effects on the hydrate-bearing sediments production process are ignored, the obtained research results would be inconsistent with the actual situation. Therefore, in this study, the effects of fracture-filling hydrates with different dipping angles on the hydrate production process were studied, and the necessity of considering the phenomenon of mixed pore- and fracture-filling hydrates in hydrate-bearing sediments was illustrated. On this basis, the simulation of a typical site (GMGS2-16) with mixed pore- and fracture-filling hydrates was constructed, and the production process was researched and optimized. The results indicated that: (a) fracture-filling hydrates formed in shallow fine-grained sediments and gradually approached the area of pore-filling hydrates, before a stable mixed zone was formed; (b) the occurrence of fracture-filling hydrates was conducive to the hydrate-bearing sediment depressurization production, and the promoting effect of the fracture-filling hydrate with smaller dipping angles was stronger; and (c) depressurization combined with heat injection could effectively compensate for the local low temperature and secondary hydrate caused by the mass decomposition of fracture-filled hydrates.

Förderung

  • National Natural Science Foundation of China
  • Jilin Scientific and Technological Development Program
  • International Cooperation Key Laboratory of Underground Energy Development and Geological Restoration
  • Graduate Innovation Fund of Jilin University

Zitieren

APA

Li, Y., Xin, X., Xu, T., Zang, Y., Yu, Z., Zhu, H., & Yuan, Y. (2023). Production Behavior of Hydrate-Bearing Sediments with Mixed Fracture- and Pore-Filling Hydrates. Journal of Marine Science and Engineering, 11(7), 1321. https://doi.org/10.3390/jmse11071321

Vancouver

Li Y, Xin X, Xu T, Zang Y, Yu Z, Zhu H, et al. Production Behavior of Hydrate-Bearing Sediments with Mixed Fracture- and Pore-Filling Hydrates. Journal of Marine Science and Engineering. 2023;11(7):1321. doi:10.3390/jmse11071321

BibTeX
@article{Li2023,
  author = {Li, Yaobin and Xin, Xin and Xu, Tianfu and Zang, Yingqi and Yu, Zimeng and Zhu, Huixing and Yuan, Yilong},
  title = {Production Behavior of Hydrate-Bearing Sediments with Mixed Fracture- and Pore-Filling Hydrates},
  journal = {Journal of Marine Science and Engineering},
  year = {2023},
  volume = {11},
  number = {7},
  pages = {1321},
  doi = {10.3390/jmse11071321}
}
Kostenlos starten →