Modeling Impact Load on a Vertical Cylinder in Dam-Break Flows
Journal of Marine Science and Engineering · 27.04.2023 · 11 (5) · 932
DOI: 10.3390/jmse11050932 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Marine Science and Engineering, online erschienen am 27.04.2023. Verfasst von Di Mu und 2 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Liaoning Province.
Abstract (Originalsprache)
A three-dimensional dam-break flow interacting with a vertical circular and square cylinder is studied in this paper using computational fluid dynamics simulations based on OpenFOAM. This resembles closely a tsunami wave and greenwater flow acting on coastal or on-deck structures, which are of relevance and importance to coastal protections and offshore operations, respectively. The numerical model is verified by comparing with published experimental measurements and is extended to investigate the effects of the structural geometry and the impacting angle β (i.e., the angle between the water front and cylinders) on the total impact load and the surrounding flow field. It is found that the impact event experiences two distinct stages characterized by a constant flow velocity and a negative flow acceleration, respectively. In addition, the total force on a square cylinder is nearly twice that of a circular cylinder although the impacting area is the same. The longitudinal and transverse forces are found to decrease and increase with the impacting angle, respectively. A close interrogation of the surrounding flow field via flow visualization suggests that the way the flow deflected from the cylinder surfaces plays an important role in determining the pressure field and thus the total force behaviors.
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Liaoning Province
Zitieren
APA
Mu, D., Chen, L., & Ning, D. (2023). Modeling Impact Load on a Vertical Cylinder in Dam-Break Flows. Journal of Marine Science and Engineering, 11(5), 932. https://doi.org/10.3390/jmse11050932
Vancouver
Mu D, Chen L, Ning D. Modeling Impact Load on a Vertical Cylinder in Dam-Break Flows. Journal of Marine Science and Engineering. 2023;11(5):932. doi:10.3390/jmse11050932
BibTeX
@article{Mu2023,
author = {Mu, Di and Chen, Lifen and Ning, Dezhi},
title = {Modeling Impact Load on a Vertical Cylinder in Dam-Break Flows},
journal = {Journal of Marine Science and Engineering},
year = {2023},
volume = {11},
number = {5},
pages = {932},
doi = {10.3390/jmse11050932}
}
EUVIMED