Numerical Study on the Breaking Process of the Seafloor Massive Sulfide Based on the FEM-SPH Adaptive Coupling Algorithm
Journal of Marine Science and Engineering · 24.03.2023 · 11 (4) · 698
DOI: 10.3390/jmse11040698 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Marine Science and Engineering, online erschienen am 24.03.2023. Verfasst von Bei Zhang und 5 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: State Key Laboratory of Ocean Engineering, Project of Sanya Yazhou Bay Science and Technology City, Science and Technology Committee of Shanghai Municipality.
Abstract (Originalsprache)
The research on seafloor massive sulfide (SMS) started relatively late, and the results on its breaking process are few. However, the breaking process contains evaluation indexes of safe, efficient and low-disturbance mining, so it is necessary to study the breaking process of seafloor massive sulfide. At the same time, the finite element method is used in most existing researches, and the system will automatically delete the failure element from the system during the simulation of rock-breaking, resulting in the inability to accurately obtain the chip state in the breaking process. In addition, SPH meshless method has unique advantages in dealing with large deformations of rock-breaking, but it has the problems of difficultly in boundary processing and serious computational time. In view of this, a hybrid discretization method of finite element method and smooth particle hydrodynamics (SPH) is proposed in this paper. On this basis, numerical simulation of a single-pick cutting seafloor massive sulfide based on the FEM-SPH adaptive coupling algorithm is carried out. Through the research in this paper, the regularity of the fragmentation process of polymetallic sulfides is obtained: firstly, the breaking process of seafloor massive sulfide experiences four stages: cutting-in of the pick, evolution of the high-stress zone, formation of the dense core, and the chips’ splash. Secondly, the three-dimensional forces on the pick change in fluctuation in the cutting process. Thirdly, the stress wave propagation is unbalanced and biased in the cutting process. Fourthly, the chips’ splash mainly has three directions: jet flow towards the opposite direction of the cutter cutting, spluttering perpendicular to the cutting surface of the pick, and sliding along the cutting surface. Finally, the chip mass is positively correlated with the cutting time. In this paper, a simulation framework for rock-breaking is proposed, and its advantages have been effectively verified.
Förderung
- State Key Laboratory of Ocean Engineering
- Project of Sanya Yazhou Bay Science and Technology City
- Science and Technology Committee of Shanghai Municipality
Zitieren
APA
Zhang, B., Lu, H., Yang, J., Zhang, D., Sun, P., & Liu, S. (2023). Numerical Study on the Breaking Process of the Seafloor Massive Sulfide Based on the FEM-SPH Adaptive Coupling Algorithm. Journal of Marine Science and Engineering, 11(4), 698. https://doi.org/10.3390/jmse11040698
Vancouver
Zhang B, Lu H, Yang J, Zhang D, Sun P, Liu S. Numerical Study on the Breaking Process of the Seafloor Massive Sulfide Based on the FEM-SPH Adaptive Coupling Algorithm. Journal of Marine Science and Engineering. 2023;11(4):698. doi:10.3390/jmse11040698
BibTeX
@article{Zhang2023,
author = {Zhang, Bei and Lu, Haining and Yang, Jianmin and Zhang, Daiyu and Sun, Pengfei and Liu, Shihang},
title = {Numerical Study on the Breaking Process of the Seafloor Massive Sulfide Based on the FEM-SPH Adaptive Coupling Algorithm},
journal = {Journal of Marine Science and Engineering},
year = {2023},
volume = {11},
number = {4},
pages = {698},
doi = {10.3390/jmse11040698}
}
EUVIMED