Maximizing Green Hydrogen Production from Water Electrocatalysis: Modeling and Optimization
Journal of Marine Science and Engineering · 15.03.2023 · 11 (3) · 617
DOI: 10.3390/jmse11030617 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Marine Science and Engineering, online erschienen am 15.03.2023. Verfasst von Hegazy Rezk und 4 weiteren Autor:innen. Die Arbeit wurde bisher 51-mal zitiert (Crossref) und nennt 89 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education in Saudi Arabia.
Abstract (Originalsprache)
The use of green hydrogen as a fuel source for marine applications has the potential to significantly reduce the carbon footprint of the industry. The development of a sustainable and cost-effective method for producing green hydrogen has gained a lot of attention. Water electrolysis is the best and most environmentally friendly method for producing green hydrogen-based renewable energy. Therefore, identifying the ideal operating parameters of the water electrolysis process is critical to hydrogen production. Three controlling factors must be appropriately identified to boost hydrogen generation, namely electrolysis time (min), electric voltage (V), and catalyst amount (μg). The proposed methodology contains the following two phases: modeling and optimization. Initially, a robust model of the water electrolysis process in terms of controlling factors was established using an adaptive neuro-fuzzy inference system (ANFIS) based on the experimental dataset. After that, a modern pelican optimization algorithm (POA) was employed to identify the ideal parameters of electrolysis duration, electric voltage, and catalyst amount to enhance hydrogen production. Compared to the measured datasets and response surface methodology (RSM), the integration of ANFIS and POA improved the generated hydrogen by around 1.3% and 1.7%, respectively. Overall, this study highlights the potential of ANFIS modeling and optimal parameter identification in optimizing the performance of solar-powered water electrocatalysis systems for green hydrogen production in marine applications. This research could pave the way for the more widespread adoption of this technology in the marine industry, which would help to reduce the industry’s carbon footprint and promote sustainability.
Förderung
- Ministry of Education in Saudi Arabia
Zitieren
APA
Rezk, H., Olabi, A. G., Abdelkareem, M. A., Alahmer, A., & Sayed, E. T. (2023). Maximizing Green Hydrogen Production from Water Electrocatalysis: Modeling and Optimization. Journal of Marine Science and Engineering, 11(3), 617. https://doi.org/10.3390/jmse11030617
Vancouver
Rezk H, Olabi AG, Abdelkareem MA, Alahmer A, Sayed ET. Maximizing Green Hydrogen Production from Water Electrocatalysis: Modeling and Optimization. Journal of Marine Science and Engineering. 2023;11(3):617. doi:10.3390/jmse11030617
BibTeX
@article{Rezk2023,
author = {Rezk, Hegazy and Olabi, A. G. and Abdelkareem, Mohammad Ali and Alahmer, Ali and Sayed, Enas Taha},
title = {Maximizing Green Hydrogen Production from Water Electrocatalysis: Modeling and Optimization},
journal = {Journal of Marine Science and Engineering},
year = {2023},
volume = {11},
number = {3},
pages = {617},
doi = {10.3390/jmse11030617}
}
EUVIMED