Wind-Assisted Ship Propulsion of a Series 60 Ship Using a Static Kite Sail
Journal of Marine Science and Engineering · 05.01.2023 · 11 (1) · 117
DOI: 10.3390/jmse11010117 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Marine Science and Engineering, online erschienen am 05.01.2023. Verfasst von Wayne Formosa und 3 weiteren Autor:innen. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: collaborative programme of the VENTuRE, EU-funded H2020.
Abstract (Originalsprache)
Following the International Maritime Organization’s goal to reduce greenhouse gas emissions, the interest in the application of wind-assisted ship propulsion (WASP) in maritime transportation is on the rise. Although a variety of WASP systems exist, the application in maritime shipping is still limited, especially in the case of kite sails. This paper presents a numerical model to carry out a theoretical assessment of the influence of the kite planform area and wind speed on the aerodynamic performance of a kite sail providing propulsive assistance to a 75 m long ship having a Series 60 hull. A static kite sail is assumed, on which a tail wind generates a thrust force to pull the vessel via a tether. While the mass of the kite is neglected, that of the tether is accounted for. A model is implemented for the tensioned tether having a catenary profile. The results generally show a positive correlation between the aerodynamic forces and the kite parameters. As expected, the output parameter values corresponding to the optimal angle of attack for a range of vessel speeds are also found to increase with an increasing relative wind speed. It is concluded that a static 320 m2 kite sail would be sufficient to meet the entire propulsion requirements of the vessel under consideration under appropriate wind conditions.
Förderung
- collaborative programme of the VENTuRE
- EU-funded H2020
Zitieren
APA
Formosa, W., Sant, T., Muscat-Fenech, C. D. M., & Figari, M. (2023). Wind-Assisted Ship Propulsion of a Series 60 Ship Using a Static Kite Sail. Journal of Marine Science and Engineering, 11(1), 117. https://doi.org/10.3390/jmse11010117
Vancouver
Formosa W, Sant T, Muscat-Fenech CDM, Figari M. Wind-Assisted Ship Propulsion of a Series 60 Ship Using a Static Kite Sail. Journal of Marine Science and Engineering. 2023;11(1):117. doi:10.3390/jmse11010117
BibTeX
@article{Formosa2023,
author = {Formosa, Wayne and Sant, Tonio and Muscat-Fenech, Claire De Marco and Figari, Massimo},
title = {Wind-Assisted Ship Propulsion of a Series 60 Ship Using a Static Kite Sail},
journal = {Journal of Marine Science and Engineering},
year = {2023},
volume = {11},
number = {1},
pages = {117},
doi = {10.3390/jmse11010117}
}
EUVIMED