Ultrashort Pulsed Laser Fabrication of High-Performance Polymer-Film-Based Moulds for Rapid Prototyping of Microfluidic Devices
Journal of Manufacturing and Materials Processing · 12.09.2025 · 9 (9) · 313
DOI: 10.3390/jmmp9090313 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 12.09.2025. Verfasst von Pieter Daniël Haasbroek und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie.
Abstract (Originalsprache)
Microfluidic device prototyping demands rapid, cost-effective, and high-precision mould fabrication, yet ultrashort pulsed laser structuring of polymer inserts remains underexplored. This study presents a novel method for fabricating microfluidic mould inserts using femtosecond (fs) laser ablation of polyimide (PI) films, achieving high precision from design to prototype. PI films (250 µm) were structured using a 355 nm fs laser (300 fs, 500 kHz, 0.95 J/cm2) in a photochemically dominated ablation regime and bonded to reusable steel plates. Injection moulding trials with cyclic olefin copolymer (COC) and polymethyl methacrylate (PMMA) were conducted with diverse designs, including concentration gradient generators (CGG), organ-on-chip (OOC) with 20 µm bridges, and double emulsion droplet generators (DEDG) with 100–500 µm channels, ensuring robustness across complex geometries. The method achieved near 1:1 replication (errors < 2%, microchannel height tolerances < 1%, Sa = 0.02 µm in channels, 0.26 µm in laser-structured areas), machining times under 2 h, and mould durability over 100 cycles without significant deterioration. The PI’s heat-retarding effect mimicked variothermal moulding, ensuring complete micro-penetration without specialised equipment. By reducing material costs using PI films and reusable steel plates, enabling rapid iterations within hours, and supporting industry-compatible prototyping, this approach lowers barriers for small-scale labs. It enables rapid prototyping of diagnostic lab-on-chip devices and supports decentralised manufacturing for biomedical, chemical, and environmental applications, offering a versatile, cost-effective tool for early-stage development.
Förderung
- European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie
Zitieren
APA
Haasbroek, P. D., Wälty, M., Grob, M., & Kristiansen, P. M. (2025). Ultrashort Pulsed Laser Fabrication of High-Performance Polymer-Film-Based Moulds for Rapid Prototyping of Microfluidic Devices. Journal of Manufacturing and Materials Processing, 9(9), 313. https://doi.org/10.3390/jmmp9090313
Vancouver
Haasbroek PD, Wälty M, Grob M, Kristiansen PM. Ultrashort Pulsed Laser Fabrication of High-Performance Polymer-Film-Based Moulds for Rapid Prototyping of Microfluidic Devices. Journal of Manufacturing and Materials Processing. 2025;9(9):313. doi:10.3390/jmmp9090313
BibTeX
@article{Haasbroek2025,
author = {Haasbroek, Pieter Daniël and Wälty, Mischa and Grob, Michael and Kristiansen, Per Magnus},
title = {Ultrashort Pulsed Laser Fabrication of High-Performance Polymer-Film-Based Moulds for Rapid Prototyping of Microfluidic Devices},
journal = {Journal of Manufacturing and Materials Processing},
year = {2025},
volume = {9},
number = {9},
pages = {313},
doi = {10.3390/jmmp9090313}
}
EUVIMED