EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Direct Ink Writing and Characterization of ZrC-Based Ceramic Pellets for Potential Nuclear Applications

Narges Malmir, Guang Yang, Thomas Poirier, Nathaniel Cavanaugh, Dong Zhao, Brian Taylor, Nikhil Churi, Tiankai Yao, Jie Lian, James H. Edgar, Dong Lin, Shuting Lei

Journal of Manufacturing and Materials Processing · 11.08.2025 · 9 (8) · 270

DOI: 10.3390/jmmp9080270 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 11.08.2025. Verfasst von Narges Malmir und 11 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Aeronautics and Space Administration, Oregon Space Grant Consortium.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Developing advanced nuclear fuel technologies is critical for high-performance applications such as nuclear thermal propulsion (NTP). This study explores the feasibility of direct ink writing (DIW) for fabricating ceramic pellets for potential nuclear applications. Zirconium carbide (ZrC) is used as a matrix material and vanadium carbide (VC) is used as a surrogate for uranium carbide (UC) in this study. A series of ink formulations were developed with varying concentrations of VC and nanocrystalline cellulose (NCC) to optimize the rheological properties for DIW processing. Post-sintering analysis revealed that conventionally sintered samples at 1750 °C exhibited high porosity (>60%), significantly reducing the compressive strength compared to dense ZrC ceramics. However, increasing VC content improved densification and mechanical properties, albeit at the cost of increased shrinkage and ink flow challenges. Spark plasma sintering (SPS) achieved near-theoretical density (~97%) but introduced geometric distortions and microcracking. Despite these challenges, this study demonstrates that DIW offers a viable route for fabricating ZrC-based ceramic structures, provided that sintering strategies and ink rheology are further optimized. These findings establish a baseline for DIW of ZrC-based materials and offer valuable insights into the porosity control, mechanical stability, and processing limitations of DIW for future nuclear fuel applications.

Förderung

  • National Aeronautics and Space Administration
  • Oregon Space Grant Consortium

Zitieren

APA

Malmir, N., Yang, G., Poirier, T., Cavanaugh, N., Zhao, D., Taylor, B., Churi, N., Yao, T., Lian, J., Edgar, J. H., Lin, D., & Lei, S. (2025). Direct Ink Writing and Characterization of ZrC-Based Ceramic Pellets for Potential Nuclear Applications. Journal of Manufacturing and Materials Processing, 9(8), 270. https://doi.org/10.3390/jmmp9080270

Vancouver

Malmir N, Yang G, Poirier T, Cavanaugh N, Zhao D, Taylor B, et al. Direct Ink Writing and Characterization of ZrC-Based Ceramic Pellets for Potential Nuclear Applications. Journal of Manufacturing and Materials Processing. 2025;9(8):270. doi:10.3390/jmmp9080270

BibTeX
@article{Malmir2025,
  author = {Malmir, Narges and Yang, Guang and Poirier, Thomas and Cavanaugh, Nathaniel and Zhao, Dong and Taylor, Brian and Churi, Nikhil and Yao, Tiankai and Lian, Jie and Edgar, James H. and Lin, Dong and Lei, Shuting},
  title = {Direct Ink Writing and Characterization of ZrC-Based Ceramic Pellets for Potential Nuclear Applications},
  journal = {Journal of Manufacturing and Materials Processing},
  year = {2025},
  volume = {9},
  number = {8},
  pages = {270},
  doi = {10.3390/jmmp9080270}
}
Kostenlos starten →